From: Scott M. Livingston (scottl@sprinthosting.net)
Date: Fri Mar 28 2003 - 03:02:48 GMT-3
Interesting. Maybe if you don't get an answer real quick you can send
your full config, FIB and BGP table referencing the 2 subnets.
Thanks,
scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Voss, David
Sent: Thursday, March 27, 2003 10:11 PM
To: 'ccielab@groupstudy.com'
Subject: Stumped on a Non-Exist Map
I am doing an advertise-map non-exist-map to a neighbor. Regardless of
what
state it is in, the status is always stuck at "Uninitialized". I've
cleared
bgp and also rebooted. The route drops out just fine, but the
non-exist-map
never kicks in. Anybody know if it should be sitting in this state?
show ip bgp nei
Condition-map 100, Advertise-map 200, status: Uninitialized
router bgp 4
bgp router-id 4.4.4.4
bgp cluster-id 3368601800
bgp log-neighbor-changes
network 200.200.200.0
neighbor 10.10.10.3 remote-as 3
neighbor 10.10.10.3 update-source Loopback100
neighbor 10.10.10.3 advertise-map 200 non-exist-map 100
neighbor 10.10.10.6 remote-as 6
neighbor 10.10.10.6 ebgp-multihop 255
neighbor 10.10.10.6 update-source Loopback100
!
R4#sh access-list 80
Standard IP access list 80
permit 100.100.100.0, wildcard bits 0.0.0.255 (2 matches) check=3
R4#sh access-list 81
Standard IP access list 81
permit 200.200.200.0, wildcard bits 0.0.0.255 (3 matches) check=2
route-map 100, permit, sequence 10
Match clauses:
ip address (access-lists): 80
Set clauses:
Policy routing matches: 0 packets, 0 bytes
route-map 200, permit, sequence 10
Match clauses:
ip address (access-lists): 81
Set clauses:
Policy routing matches: 0 packets, 0 bytes
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:45 GMT-3