From: Fabrice Bobes (study@6colabs.com)
Date: Thu Mar 27 2003 - 18:21:16 GMT-3
Hi Scott,
If I may, I wouldn't allocate 100% of the bandwidth to the classes and
would keep the default to 75 %. If you want to assign more than 75% to
the classes, that's fine but not up to 100%.
In other words, I'd rather use this formula for queue #1:
128 kbps * (1000/11500) * 0.75 = 8 (bandwidth 8)
In percentage, this gives us:
(1000/11500) * 0.75 = 6.5 (bandwidth percent 6)
May be I am missing something here so any input?
Fabrice
http://www.6colabs.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Scott M. Livingston
Sent: Monday, March 24, 2003 8:01 PM
To: 'Abdul Waheed Ghaffar'; ccielab@groupstudy.com
Subject: RE: QOS
Here is my attempt. For these scenarios if I can spot the bandwidth
percent real quick then I just use the 'bandwidth percent' command. In
my own freakish way of thinking I can convert it quicker using the
formula below. Tell me what you all think and please let me know if I
messed up somewhere.
BW of Link in kbps * (byte count / total byte count) = BW
For example:
Queue #1
---------
128 kbps * (1000 / 11500) = 11
!
class-map match-all TELNET
match protocol telnet
class-map match-all DLSW
match protocol dlsw
class-map match-all FTP
match protocol ftp
class-map match-all DNS
match protocol dns
!
policy-map MORE-FUN
class TELNET
bandwidth 11
queue-limit 100
class DNS
bandwidth 16
queue-limit 100
class FTP
bandwidth 33
queue-limit 20
class DLSW
bandwidth 55
queue-limit 20
class class-default
bandwidth 11
queue-limit 20
!
thank you,
scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Abdul Waheed Ghaffar
Sent: Monday, March 24, 2003 7:04 AM
To: ccielab@groupstudy.com
Subject: QOS
Hi group,
I need to convert following CQ into CBWFQ
# queue-list 1 protocol tcp 1 telnet byte-count 1000 limit 100
# queue-list 1 protocol udp 2 domain limit 100
# queue-list 1 protocol tcp 3 ftp byte-count 3000
# queue-list 1 protocol dlsw 4 byte-count 5000
# queue-list 1 default 16 byte-count 1000
# interface serial 0/1
# custom-queue-list 1
can any body giude me...the serial interface is frame-relay encapsulated
...will i map the service on physical interface or under class-map
frame-relay?
thanks in advance
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:45 GMT-3