From: Scott M. Livingston (scottl@sprinthosting.net)
Date: Thu Mar 27 2003 - 18:37:07 GMT-3
Hmmmm? Interesting thinking on your part.
If you do it that way though you really wouldn't be allocating the same
amount of BW that the CQ was allocating to that traffic right? Am I
missing something here?
Scott
-----Original Message-----
From: Fabrice Bobes [mailto:study@6colabs.com]
Sent: Thursday, March 27, 2003 3:21 PM
To: 'Scott M. Livingston'; 'Abdul Waheed Ghaffar';
ccielab@groupstudy.com
Subject: RE: QOS
Hi Scott,
If I may, I wouldn't allocate 100% of the bandwidth to the classes and
would keep the default to 75 %. If you want to assign more than 75% to
the classes, that's fine but not up to 100%.
In other words, I'd rather use this formula for queue #1:
128 kbps * (1000/11500) * 0.75 = 8 (bandwidth 8)
In percentage, this gives us:
(1000/11500) * 0.75 = 6.5 (bandwidth percent 6)
May be I am missing something here so any input?
Fabrice
http://www.6colabs.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Scott M. Livingston
Sent: Monday, March 24, 2003 8:01 PM
To: 'Abdul Waheed Ghaffar'; ccielab@groupstudy.com
Subject: RE: QOS
Here is my attempt. For these scenarios if I can spot the bandwidth
percent real quick then I just use the 'bandwidth percent' command. In
my own freakish way of thinking I can convert it quicker using the
formula below. Tell me what you all think and please let me know if I
messed up somewhere.
BW of Link in kbps * (byte count / total byte count) = BW
For example:
Queue #1
---------
128 kbps * (1000 / 11500) = 11
!
class-map match-all TELNET
match protocol telnet
class-map match-all DLSW
match protocol dlsw
class-map match-all FTP
match protocol ftp
class-map match-all DNS
match protocol dns
!
policy-map MORE-FUN
class TELNET
bandwidth 11
queue-limit 100
class DNS
bandwidth 16
queue-limit 100
class FTP
bandwidth 33
queue-limit 20
class DLSW
bandwidth 55
queue-limit 20
class class-default
bandwidth 11
queue-limit 20
!
thank you,
scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Abdul Waheed Ghaffar
Sent: Monday, March 24, 2003 7:04 AM
To: ccielab@groupstudy.com
Subject: QOS
Hi group,
I need to convert following CQ into CBWFQ
# queue-list 1 protocol tcp 1 telnet byte-count 1000 limit 100
# queue-list 1 protocol udp 2 domain limit 100
# queue-list 1 protocol tcp 3 ftp byte-count 3000
# queue-list 1 protocol dlsw 4 byte-count 5000
# queue-list 1 default 16 byte-count 1000
# interface serial 0/1
# custom-queue-list 1
can any body giude me...the serial interface is frame-relay encapsulated
...will i map the service on physical interface or under class-map
frame-relay?
thanks in advance
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:45 GMT-3