From: Hunt Lee (huntl@webcentral.com.au)
Date: Tue Mar 25 2003 - 20:11:22 GMT-3
Hey Gary,
What difference would it make if I used "channel-group 1 mode on" isntead of
"channel-group 1 mode desirable"?
I have always used "channel-group 1 mode on" at work, but I have never used
the other one before ;)
Thanks in advance,
Regards,
Hunt
-----Original Message-----
From: Gary Lileikis [mailto:glileikis@rogers.com]
Sent: Wednesday, 26 March 2003 6:13 AM
To: 'Fan Shan'
Cc: Ccielab@Groupstudy.Com
Subject: RE: How to configure a ethernet channel as trunk on3550?
Fan,
This should work:
interface Port-channel1
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
interface FastEthernet0/22
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
channel-group 1 mode desirable
!
interface FastEthernet0/23
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
channel-group 1 mode desirable
Regards,
Gary Lileikis
-----Original Message-----
From: Fan Shan [mailto:shanf@public.jn.sd.cn]
Sent: Tuesday, March 25, 2003 11:36 AM
To: Ccielab@Groupstudy.Com
Subject: How to configure a ethernet channel as trunk on3550?
How to configure a two-port etherchannel ,and make it a trunk? pls in
detail, thx
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:44 GMT-3