From: Teck PhrEAk!! (phreakinphunk@hotmail.com)
Date: Tue Mar 25 2003 - 05:53:41 GMT-3
You will apply it on the physical interface(service policy)....shud apply it
in the map-class frame relay (FRTS) only when u have to apply it on a
particular PVC.
check using R1#>sh int policy
cheers
sumit p ahuja
ccie#11125
ccdp,ccnp,rhce,scsa,mcse,ibm e-biz pro.
>From: "Abdul Waheed Ghaffar" <a_w_ghaffar@hotmail.com>
>Reply-To: "Abdul Waheed Ghaffar" <a_w_ghaffar@hotmail.com>
>To: scottl@sprinthosting.net, ccielab@groupstudy.com
>Subject: RE: QOS
>Date: Tue, 25 Mar 2003 12:41:44 +0500
>
>where we will put service-map ? configure it on Physical interface OR
>configure it under map-class fr command?
>
>
>
>
>>From: "Scott M. Livingston" <scottl@sprinthosting.net>
>>Reply-To: "Scott M. Livingston" <scottl@sprinthosting.net>
>>To: "'Abdul Waheed Ghaffar'" <a_w_ghaffar@hotmail.com>,
>><ccielab@groupstudy.com>
>>Subject: RE: QOS
>>Date: Mon, 24 Mar 2003 22:00:32 -0600
>>
>>Here is my attempt. For these scenarios if I can spot the bandwidth
>>percent real quick then I just use the 'bandwidth percent' command. In
>>my own freakish way of thinking I can convert it quicker using the
>>formula below. Tell me what you all think and please let me know if I
>>messed up somewhere.
>>
>>BW of Link in kbps * (byte count / total byte count) = BW
>>
>>For example:
>>
>>Queue #1
>>---------
>>128 kbps * (1000 / 11500) = 11
>>
>>!
>>class-map match-all TELNET
>> match protocol telnet
>>class-map match-all DLSW
>> match protocol dlsw
>>class-map match-all FTP
>> match protocol ftp
>>class-map match-all DNS
>> match protocol dns
>>!
>>policy-map MORE-FUN
>> class TELNET
>> bandwidth 11
>> queue-limit 100
>> class DNS
>> bandwidth 16
>> queue-limit 100
>> class FTP
>> bandwidth 33
>> queue-limit 20
>> class DLSW
>> bandwidth 55
>> queue-limit 20
>> class class-default
>> bandwidth 11
>> queue-limit 20
>>!
>>
>>thank you,
>>scott
>>
>>-----Original Message-----
>>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>>Abdul Waheed Ghaffar
>>Sent: Monday, March 24, 2003 7:04 AM
>>To: ccielab@groupstudy.com
>>Subject: QOS
>>
>>Hi group,
>>
>>I need to convert following CQ into CBWFQ
>># queue-list 1 protocol tcp 1 telnet byte-count 1000 limit 100
>># queue-list 1 protocol udp 2 domain limit 100
>># queue-list 1 protocol tcp 3 ftp byte-count 3000
>># queue-list 1 protocol dlsw 4 byte-count 5000
>># queue-list 1 default 16 byte-count 1000
>># interface serial 0/1
>># custom-queue-list 1
>>
>>can any body giude me...the serial interface is frame-relay encapsulated
>>
>>...will i map the service on physical interface or under class-map
>>frame-relay?
>>
>>thanks in advance
>>
>>
>>
>>_________________________________________________________________
>>The new MSN 8: smart spam protection and 2 months FREE*
>>http://join.msn.com/?page=features/junkmail
>
>
>_________________________________________________________________
>The new MSN 8: smart spam protection and 2 months FREE*
>http://join.msn.com/?page=features/junkmail
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:44 GMT-3