Re: ATM SVC routing exchange!

From: Tasuka Amano Hsu (tasuka@mac.com)
Date: Fri Mar 21 2003 - 08:02:41 GMT-3

• Next message: Hunt Lee: "rate-limit"
• Previous message: Nawaz, Ajaz: "RE: load threshold"
• Maybe in reply to: Tasuka Amano Hsu: "ATM SVC routing exchange!"
• Next in thread: Joe Chang: "Re: ATM SVC routing exchange!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I found the atm idle-time command could resolve this problem.

Best Regards

On Friday, Mar 21, 2003, at 04:17 Asia/Taipei, Rajani Deshpande wrote:

> Could you send your config on both side routers ?
>
> Thanks
> --- Tasuka Amano Hsu <tasuka@mac.com> wrote:
>> Hi,
>> after I configure a ATM connection with SVC with
>> Classical IP,
>> and use EIGRP and BGP for routing exchange,
>> I found if no traffic pass the ATM SVC path, the
>> path will disconnected,
>> and that make the routing did not keep renew, any
>> method ?
>> or that is normal for SVC ?
>>
>> Best Regards
>> Tasuka
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
> http://platinum.yahoo.com

• Next message: Hunt Lee: "rate-limit"
• Previous message: Nawaz, Ajaz: "RE: load threshold"
• Maybe in reply to: Tasuka Amano Hsu: "ATM SVC routing exchange!"
• Next in thread: Joe Chang: "Re: ATM SVC routing exchange!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:43 GMT-3