From: Brian Dennis (brian@5g.net)
Date: Sun Mar 16 2003 - 14:05:52 GMT-3
You are permitting IP but not CLNS in your dialer-list. If you want ISIS
to trigger the call you need to permit CLNS.
dialer-list 10 protocol clns_is permit
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security) CCSI# 98640
brian@labforge.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Stewart, Dirk
Sent: Sunday, March 16, 2003 7:05 AM
To: ccielab@groupstudy.com
Subject: How do I set interesting traffric for ISIS ON ISDN
hostname R4
!
clns routing
!
interface BRI0
ip address 133.20.1.1 255.255.255.252
ip router isis
encapsulation ppp
ip ospf authentication message-digest
ip ospf message-digest-key 10 md5 cisco1
ip ospf cost 9999
ip ospf demand-circuit
dialer map clns 49.0001.0000.0030.00 name R3 broadcast 7155491000
<--------
dialer map clns 49.0001.0000.0030.00 name R3 broadcast 7155491001
<--------- I DID THIS BUT NOTHING COMING UP
dialer map ip 133.20.1.2 name R3 broadcast 7155491000
dialer map ip 133.20.1.2 name R3 broadcast 7155491001
dialer load-threshold 1 outbound
dialer-group 10
isdn switch-type basic-net3
ppp authentication chap
ppp multilink
!
access-list 101 deny ospf any any
access-list 101 permit ip any any time-range maxtime <------ I
permit all ip but I am not seeing isis protocol any ideal?
dialer-list 10 protocol ip list 101
!
time-range maxtime
periodic Friday Saturday 7:00 to 21:00
periodic Sunday 8:00 to 12:00
!
!
router isis
redistribute ospf 1 route-map ospftoisis
distance 80 clns
net 49.0001.0000.0000.0014.00
is-type level-2-only
metric-style wide level-2
!
-----------------------------------------------------------------------
The contents of this message have been scanned for viruses by
the TruSecure ShadowMail Service, and no viruses were found.
-----------------------------------------------------------------------
* This message has been processed by TruSecure's ShadowMail service
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:40 GMT-3