From: Brian Dennis (brian@labforge.com)
Date: Sun Mar 16 2003 - 02:35:39 GMT-3
1) Look into Cisco bug ID CSCdp26660. Basically you'll need to either
not use the command or upgrade the IOS.
2) Regular-expressions are in the appendixes of IOS Dial Services
Command Reference.
http://www.cisco.com/univercd/home/home.htm ->
Release 12.1 ->
Cisco IOS Release 12.1 Configuration Guides and Command References ->
DR: Cisco IOS Dial Services Command Reference, Release 12.1 ->
DR: Part 1: Appendixes ->
Appendix: Regular Expressions
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security) CCSI# 98640
brian@labforge.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
eric
Sent: Saturday, March 15, 2003 8:29 PM
To: Ccielab
Subject: bgp defualt-origiinate
Hello all
2 things
the first being every time I try to send a default route to a nei
r1(config)#ip route 0.0.0.0 0.0.0.0 e1
r1(config-router)#redist stat
r1(config-router)#redist static
r1(config-router)#neigh 150.4.1.8 default-originate
it crashs my router, now this does not seem like the right thing to be
happening. it is a 2500 but fully loaded
any ideas ??
2.
Does anyone know where the regular-expressions are on the cd under 12.1
I found em under 12.2 not sure if that is going to be available to me in
the
lab. I have searched high and low on the 12.1 cant find em.
Regards,
~e
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:40 GMT-3