From: Brian Dennis (brian@labforge.com)
Date: Sun Mar 16 2003 - 02:08:03 GMT-3
Sage,
Is there a virtual link involved in your configuration? If not send your
configs relating to OSPF from R2 and R3. Also send the output from a
"sho ip rout ospf" from R1.
Were you altering the admin distances of the routes earlier? They were
showing up with an admin distance of 170 and now have a distance of 110.
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security) CCSI# 98640
brian@labforge.com
-----Original Message-----
From: Sage Vadi [mailto:sagevadi@yahoo.co.uk]
Sent: Saturday, March 15, 2003 8:27 PM
To: Brian Dennis; ccielab@groupstudy.com
Subject: RE: OSPF: weird summarization issue
I agree, I remembered those rules the first time
somebody pointed them out on groupstudy. So these
areas are different areas I can quite safely say.
Also both the ABRs - have the same area ranges
configured on them..
R1---A0---+R2---A3
+R3---A3
R1 is a multipoint, R2/R3 physical serials. They have
a A3 network which they are summarzing into A0, but
the summarization does not works as desired:
The A3 network, as it appears after area-range on R1:
155.10.8.0/25 [110/84] via 155.10.11.3,
[110/84] via 155.10.11.1,
155.10.8.0/24 [110/74] via 155.10.11.3,
[110/74] via 155.10.11.1,
Any other thoughts Brian?
rgds,
Sage
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:40 GMT-3