From: ccie2be (ccie2be@nyc.rr.com)
Date: Thu Mar 13 2003 - 07:12:50 GMT-3
Hey Mike,
Thanks for the sample lab. I didn't know this lab existed.
However, that didn't address my quesion. I knew there were 2 ways to config
VTP just like there are 2 ways to config vlans. The question, though, is
what happens if you're not consistent. Does it cause any problem if you use
1 method to config some things and use the other method for other things?
Notice that in the 3550 config guide that it talks about differences between
the 2 methods when it comes to saving the config. (Although, I read about
it a couple times, but I can't say that I really understood it.) Because of
this, I wonder, for example, if it's possible that all may seem OK until the
switch is rebooted.
Jim
----- Original Message -----
From: "Mike Williams" <ccie2be@swbell.net>
To: "'ccie2be'" <ccie2be@nyc.rr.com>
Sent: Wednesday, March 12, 2003 11:01 PM
Subject: RE: 3550: Config-vlan mode versus Vlan-config mode
> Actually, it was the free IPExpert 3550 scenario.....
>
> Here it is.... Under instructor comments is says configuring VTP is the
> same in global config or vlan config mode.
>
> Enjoy!
> Mike W.
>
> -----Original Message-----
> From: ccie2be [mailto:ccie2be@nyc.rr.com]
> Sent: Wednesday, March 12, 2003 6:35 PM
> To: Mike Williams
> Subject: Re: 3550: Config-vlan mode versus Vlan-config mode
>
>
> Hi Mike,
>
> Thanks for getting back to me. I appreciate it.
>
> When you say "one of my practice scenarios" what are you referring to?
>
> Jim
> ----- Original Message -----
> From: "Mike Williams" <ccie2be@swbell.net>
> To: "'ccie2be'" <ccie2be@nyc.rr.com>
> Sent: Wednesday, March 12, 2003 7:10 PM
> Subject: RE: 3550: Config-vlan mode versus Vlan-config mode
>
>
> > AFAIK, they both work the same, so using them both shouldn't cause any
>
> > problems.
> >
> > I believe one of my practice scenarios as a "tip" mentioned that you
> > could also use the config-vlan mode or vlan-config mode.
> >
> > HTH,
> > Mike W.
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of ccie2be
> > Sent: Wednesday, March 12, 2003 3:20 PM
> > To: Group Study
> > Subject: 3550: Config-vlan mode versus Vlan-config mode
> >
> >
> > Hi all,
> >
> > Have any of you noticed there are 2 ways to configure VTP and Vlan
> > with the 3550?
> >
> > I don't have a 3550 so I can't test this but what happens if VTP is
> > configured using Config-vlan mode and Vlan's are created or modified
> > using Vlan-config mode (vlan database)?
> >
> > If this causes problems, I'm sure I'll stumble upon it in the lab
> > unless I've focused on it beforehand.
> >
> > thanks, Jim
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:38 GMT-3