From: DougAtHome (dcalton@fuse.net)
Date: Wed Mar 12 2003 - 09:26:45 GMT-3
I think you need dlsw bridge-group 1. That's what ties the DLSW tunnel to
the Ethernet interfaces, if I understand correctly.
-----Original Message-----
From: Janto Cin [mailto:jantocin@datacomm.co.id]
Sent: Tuesday, March 11, 2003 9:12 PM
To: ccielab@groupstudy.com
Subject: Re: can't have communication in dlsw llc2 encapsulation
Can you ping each local-peer peer-id from both routers?
----- Original Message -----
From: "FATHALLAH" <sfathallah@mail.cbi.net.ma>
To: "Ccielab" <ccielab@groupstudy.com>
Sent: Tuesday, March 11, 2003 11:11 PM
Subject: can't have communication in dlsw llc2 encapsulation
> hello group,
>
> I have two router with dlsw lite encapsulation over frame relay.
>
> The peering is ok but I have this message :" %DLSW-3-PLFCHANGE: WAN media
> mtu maximum is 516, lowering peer lf".
> also when using llc2 encap i can't get communication betwen two netbios
> station.
>
> This is the configs.
>
> R2 config
>
>
> Current configuration : 1519 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R2
> !
> netbios access-list host no-traitement permit fathallah
> netbios access-list host no-traitement permit FATHALLAH
> !
> !
> !
> !
> !
> memory-size iomem 15
> ip subnet-zero
> no ip domain-lookup
> !
> !
> !
> !
> dlsw local-peer peer-id 172.16.1.1 lf 1500
> dlsw remote-peer 0 frame-relay interface Serial0/0 203 lf 516
> !
> interface Loopback0
> ip address 172.16.1.1 255.255.255.0
> !
> interface Ethernet0/0
> ip address 192.168.6.14 255.255.255.0 secondary
> ip address 165.10.30.2 255.255.255.0
> bridge-group 1
> !
> interface Serial0/0
> ip address 165.10.20.2 255.255.255.0
> encapsulation frame-relay
> ip ospf priority 0
> frame-relay map llc2 203 broadcast
> frame-relay map dlsw 203 broadcast
> frame-relay map ip 165.10.20.4 204 broadcast
> frame-relay lmi-type cisco
> !
> interface Serial0/1
> interface Serial0/1
> ip address 165.10.1.2 255.255.255.252
> !
> router ospf 1
> log-adjacency-changes
> area 30 virtual-link 165.10.40.1
> network 165.10.1.2 0.0.0.0 area 30
> network 165.10.20.2 0.0.0.0 area 10
> network 165.10.30.2 0.0.0.0 area 100
> !
> router bgp 5
> bgp log-neighbor-changes
> network 172.16.1.0 mask 255.255.255.0
> neighbor 165.10.1.1 remote-as 2001
> !
> ip classless
> ip http server
> !
> access-list 200 deny 0xE0E0 0x0101
> access-list 201 permit 0xE0E0 0x0101
> access-list 700 permit 0007.1919.34ed 0000.0000.0000
> !
> bridge 1 protocol ieee
> line con 0
> logging synchronous
> line aux 0
> line vty 0 4
> login
> !
> end
>
>
>
> R3 config
>
> Current configuration : 1184 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R3
> !
> !
> !
> !
> !
> !
> memory-size iomem 15
> ip subnet-zero
> no ip domain-lookup
> !
> !
> !
> !
> !
> dlsw local-peer peer-id 165.10.40.3 lf 1500
> dlsw remote-peer 0 frame-relay interface Serial0/0 302 lf 516
> !
> interface Ethernet0/0
> ip address 165.10.40.3 255.255.255.0
> bridge-group 1
> !
> interface Serial0/0
> ip address 165.10.20.3 255.255.255.0
> encapsulation frame-relay
> ip ospf priority 0
> no fair-queue
> frame-relay map llc2 302 broadcast
> frame-relay map dlsw 302 broadcast
> frame-relay map bridge 204 broadcast
> frame-relay map ip 165.10.20.4 304 broadcast
> bridge-group 1
> !
> interface Serial0/1
> no ip address
> shutdown
> !
> router ospf 1
> log-adjacency-changes
> network 165.10.20.3 0.0.0.0 area 10
> network 165.10.40.3 0.0.0.0 area 0
> !
> router bgp 2001
> no synchronization
> bgp log-neighbor-changes
> neighbor 165.10.20.4 remote-as 2010
> neighbor 165.10.40.1 remote-as 2001
> neighbor 165.10.40.1 next-hop-self
> !
> ip classless
> ip http server
> !
> !
> bridge 1 protocol ieee
> !
> !
> line con 0
> logging synchronous
> line aux 0
> line vty 0 4
> login
> !
> end
>
>
> Can someone help me there.
>
> any response will be appriciated
>
> Said FFATHALLAH
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:38 GMT-3