From: Khalid Ameen (khalid_ameen@rayaintegration.com)
Date: Wed Mar 12 2003 - 06:05:40 GMT-3
Permit 66.44.45.0 0.0.2.0
Permit 45.111.111.0 109.0.0.0
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Voss, David
Sent: Tuesday, March 11, 2003 9:59 PM
To: ccielab@groupstudy.com
Subject: RE: ACL Tips and Tricks
Thanks for the responses. I am bumping into questions stating "create
an
ACL using the minimum number of commands"
permit 66.44.45.0
permit 66.44.47.0
permit 45.111.111.0
permit 64.111.111.0
I still have to create 4 lines in the ACL, as long as they are
requesting
that 'all other subnets' must be denied, I can't simply summarize or use
fewer lines than 4.
-----Original Message-----
From: Scott Morris [mailto:swm@emanon.com]
Sent: Tuesday, March 11, 2003 1:34 PM
To: Voss, David; ccielab@groupstudy.com
Subject: RE: ACL Tips and Tricks
199 = 11000111
204 = 11001100
There are 3 bits of difference between the two, so it is impossible to
summarize them in one statement without including extraneous routes.
Enjoy!
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Voss, David
Sent: Tuesday, March 11, 2003 12:49 PM
To: ccielab@groupstudy.com
Subject: ACL Tips and Tricks
Permit the following subnets in an ACL with only 1 command... and deny
all other subnets.... I don't believe this can be done with 1 command.
Maybe someone can give it a shot?
204.95.160.0/24
199.95.160.0/24
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:37 GMT-3