From: Khalid Ameen (khalid_ameen@rayaintegration.com)
Date: Wed Mar 12 2003 - 06:01:22 GMT-3
It can be done only using one command cause here you are asked to allow
only two subnets not the range between this two subnets and you can
filter both using this
199 = 11000111
204 = 11001100
here your inverse mask is 00001011
hope this helps
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Voss, David
Sent: Tuesday, March 11, 2003 7:49 PM
To: ccielab@groupstudy.com
Subject: ACL Tips and Tricks
Permit the following subnets in an ACL with only 1 command... and deny
all
other subnets.... I don't believe this can be done with 1 command.
Maybe
someone can give it a shot?
204.95.160.0/24
199.95.160.0/24
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:37 GMT-3