From: Hoang Duc Phuong (kieu@hn.vnn.vn)
Date: Wed Dec 31 1997 - 17:11:18 GMT-3
"distribute-list 3 out" is applied to filter outgoing advertise to neighbor
router,
"distribute-list 3 in" is applied to filter incoming advertise from neighbor
router
Note that: passive-interface not work correctly with EIGRP, you should use
distribute-list instead
Cheer
----- Original Message -----
From: "eric" <namaste@pacbell.net>
To: "Tom Young" <gitsyoung@yahoo.co.jp>; <ccielab@groupstudy.com>
Sent: Friday, March 07, 2003 1:43 PM
Subject: RE: distribute-list
> Try a ? after the out and you will see the meaning. It can be your best
> friend.
>
> ~e
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Tom
> Young
> Sent: Thursday, March 06, 2003 6:15 PM
> To: ccielab@groupstudy.com
> Subject: distribute-list
>
>
> Hi,group
>
> A question about distribute-list, I think if you
> distribute a protocol into other one, the action should be
> one-way, so, in the distribute-list command ,the in or out
> parameter is meanless, I don't know why the out or in
> parameter should be set like the sample following:
>
> router ospf 1
> log-adjacency-changes
> redistribute eigrp 1 metric 20 metric-type 1 subnets
> route-map filter1
> network 137.20.101.5 0.0.0.0 area 0
> distribute-list 3 out
>
> Thanks alot
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! BB is Broadband by Yahoo! http://bb.yahoo.co.jp/
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:36 GMT-3