From: Raj Bahad (raj.bahad@totalise.co.uk)
Date: Fri Mar 07 2003 - 06:43:11 GMT-3
Larry,
Thanks for your input!
This may sound like a silly question, but can you confirm that the layer 3
routed interface (EtherSwitch Module) includes features like NAT, HSRP and
Queuing.
I'm assuming the answer will be yes!
Again, thanks for your help!
Cheers,
Raj
CCIE #10256
Network Consultant
European Space Agency
>===== Original Message From "Larry Letterman" <lletterm@cisco.com> =====
>I just started playing with my 3745 today. It has 2 32 port ethernet switch
>modules, 2 fast ethernet interfaces and 2 gig ports on one of the 32 NM
>modules. I verified that I can in fact set up an Ip address on any of the
>ethernet ports and use them as a layer 2 or 3 routed interface.
>
>Larry Letterman
>Network Engineer
>Cisco Systems
>
>
> ----- Original Message -----
> From: Sandeep Lugani
> To: KK Fok ; ccielab@groupstudy.com
> Sent: Thursday, March 06, 2003 7:52 PM
> Subject: RE: NM-16ESW
>
>
> We have used in several implementation. In NM16ESW, FE ports are not routed
>ports. They are switch ports only. Only good thing that switch and router are
>connected internally.
>
> > Thanks and Regards
> >
> > Sandeep Lugani
> > CCIE 6691, Technical Specialist
> > Wipro Infotech Mobile : 9810775057
> > Thapar House Fax : 91- 11-3362145
> > 124, Janpath E-Mail : sandeep.lugani@wipro.co.in
> > New Delhi - 110 001 Web : www.wipro.co.in
> >
>
>
> -----Original Message-----
> From: KK Fok [mailto:rgb98a@hotmail.com]
> Sent: Thursday, March 06, 2003 5:21 PM
> To: ccielab@groupstudy.com
> Subject: NM-16ESW
>
>
> Hi Group,
>
> Has anyone played with this NM-16ESW? Can I treat indiviudal ports as
routed
> interface and do NAT, apply access list, etc?
>
> Thanks in advance for your help.
>
>
>
>
>
>
>
> _________________________________________________________________
> STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
> http://join.msn.com/?page=features/junkmail
>
> DISCLAIMER:
> Information contained and transmitted by this E-MAIL is proprietary to
> Wipro Limited and is intended for use only by the individual or entity
> to which it is addressed, and may contain information that is privileged,
> confidential or exempt from disclosure under applicable law. If this is
> a forwarded message, the content of this E-MAIL may not have been sent
> with the authority of the Company. If you are not the intended recipient,
> an agent of the intended recipient or a person responsible for delivering
> the information to the named recipient, you are notified that any use,
> distribution, transmission, printing, copying or dissemination of this
> information in any way or in any manner is strictly prohibited. If you have
> received this communication in error, please delete this mail & notify us
> immediately at mailadmin@wipro.co.in
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:34 GMT-3