From: Hunt Lee (ciscoforme3@yahoo.com.au)
Date: Wed Mar 05 2003 - 10:37:26 GMT-3
Thanks for all those reply ;-)
I found out what was wrong now.
Regards,
Hunt
--- "McCallum, Robert" <Robert.McCallum@let-it-be-thus.com> wrote: > why dont you
just set your terminal settings to the same rate?
>
> > -----Original Message-----
> > From: Hunt Lee [mailto:ciscoforme3@yahoo.com.au]
> > Sent: 05 March 2003 11:47
> > To: ccielab@groupstudy.com
> > Subject: 2620 router problem, please help
> >
> >
> > Does anyone out there knows how to set the config-register
> > for Cisco 2620?
> >
> > I was doing an IOS upgrade for new flash so I change the baud
> > rate to 115200 with
> > the confreg command in BootROM mode.
> >
> > Now, my upgrade is done but the problem is I don't know how
> > to set it back to the
> > normal standard 9600.
> >
> > I tried that confreg command (in BootROM) as well as using
> > config-register 0x2102...
> > the router looks it boots up fine, but near the end of the
> > bootup, it shows up a
> > bunch of garbles... and I can't use the router ;-(
> >
> >
> > rommon 2 > confreg 0x2102
> >
> > You must reset or power cycle for new config to take effect
> > rommon 3 > reset
> >
> >
> >
> >
> > cisco 2620 (MPC860) processor (revision 0x101) with
> > 59392K/6144K bytes of memory.
> > Processor board ID JAD043206M9 (2514823060)
> > M860 processor: part number 0, mask 49
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > SuperLAT software (copyright 1990 by Meridian Technology Corp).
> > TN3270 Emulation software.
> > 1 FastEthernet/IEEE 802.3 interface(s)
> > 1 Serial network interface(s)
> > 2 Voice FXS interface(s)
> > 32K bytes of non-volatile configuration memory.
> > 16384K bytes of processor board System flash (Read/Write)
> > X|<|[~`_|_vvXW;^ [LvX+.WO[Lvim{LZ<,_L[,O6 Zg;&Z_2>Xi9:]
> >
> > Z9[LCa^2aL^? {
> >
> >
> >
> > And if I rebooted my router and go back to BootROM mode, the
> > baud rate has changed
> > itself back somehow to 115200..
> >
> >
> > Is there a command to clear the config-register value to its default?
> >
> > Thanks in advance,
> >
> > Best Regards,
> > Hunt
> >
> > http://mobile.yahoo.com.au - Yahoo! Mobile
> > - Exchange IMs with Messenger friends on your Telstra or
> > Vodafone mobile phone.
> >
http://mobile.yahoo.com.au - Yahoo! Mobile
- Exchange IMs with Messenger friends on your Telstra or Vodafone mobile phone.
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:32 GMT-3