From: Brian Dennis (brian@labforge.com)
Date: Tue Mar 04 2003 - 03:40:12 GMT-3
I'm going to assume you are referring to BGP. For BGP you can use the
"show ip bgp neighbors <neighbor's ip address> advertised-routes"
command to see what routes you are sending.
<Quote>
If there is not, so it means if we are doing filter to the backbone or
metric changes we cannot verify whether our configuration is true. A
little bit not fair I think.
</Quote>
If you are a real internetworking expert you should be able to view your
routing table and configuration and know what routes you are sending.
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
brian@labforge.com
http://www.labforge.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
rionaldi
Sent: Sunday, March 02, 2003 6:06 PM
To: ccielab@groupstudy.com
Subject: Checking Route Table in the Backbone
> Dear All,
>
> Is there any way that we can verify backbone routing table or routing
> protocol specific table/database.. on the backbone router in the
> lab...? If we being asked to filter or adjust some routing protocol
> parameter or advertisement to the backbone.
>
> If there is not, so it means if we are doing filter to the backbone or
> metric changes we cannot verify whether our configuration is true. A
> little bit not fair I think.
>
> Regards,
> Prio
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:31 GMT-3