From: John Tafasi (johntafasi@yahoo.com)
Date: Sat Mar 01 2003 - 23:47:30 GMT-3
Hi group,
I have a cisco 2522 router that is configured as a frame relay switch. I am
trying to configure CIR on serial 4 so that if the router connected to s4 is
sending more traffic than the configured CIR, packets will be dropped at fhe
frame relay switch. I configured the CIR on the switch but it seems that the
router connected to s4 can still send traffic at rates exceeding the CIR,
and the FR switch will not drop any packet.
Can some one give an advice here?
Below is the configuration of the frame relay switch.
Frame_Relay_Switch#show run
Building configuration...
Current configuration:
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname Frame_Relay_Switch
!
enable secret 5 $1$dzof$Eb3uuMoHCj2x4/dCZFZ5T.
!
frame-relay switching
!
interface Ethernet0
no ip address
shutdown
!
interface Serial0
no ip address
shutdown
!
interface Serial1
no ip address
shutdown
!
interface Serial2
no ip address
encapsulation frame-relay
clockrate 64000
frame-relay intf-type dce
frame-relay route 104 interface Serial4 401
frame-relay route 105 interface Serial5 501
frame-relay route 106 interface Serial6 601
!
interface Serial3
no ip address
shutdown
!
interface Serial4
no ip address
encapsulation frame-relay
clockrate 64000
frame-relay class para
frame-relay intf-type dce
frame-relay route 401 interface Serial2 104
frame-relay route 405 interface Serial5 504
frame-relay route 406 interface Serial6 604
!
interface Serial5
no ip address
encapsulation frame-relay
clockrate 64000
frame-relay intf-type dce
frame-relay route 501 interface Serial2 105
frame-relay route 504 interface Serial4 405
frame-relay route 506 interface Serial6 605
!
interface Serial6
no ip address
encapsulation frame-relay
clockrate 64000
frame-relay intf-type dce
frame-relay route 601 interface Serial2 106
frame-relay route 604 interface Serial4 406
frame-relay route 605 interface Serial5 506
!
interface Serial7
no ip address
shutdown
!
interface Serial8
no ip address
shutdown
!
interface Serial9
no ip address
shutdown
!
interface BRI0
no ip address
shutdown
!
no ip classless
!
map-class frame-relay parameters
frame-relay cir 300
!
map-class frame-relay para
frame-relay traffic-rate 1000
frame-relay cir 1000
frame-relay bc 1000
!
line con 0
exec-timeout 3 0
line aux 0
line vty 0 4
login
!
end
Frame_Relay_Switch#
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:30 GMT-3