From: ccie_studying (ccie_studying@hotmail.com)
Date: Thu Feb 27 2003 - 00:43:12 GMT-3
Will it work as access port? I saw this type of configuration somewhere. And
3550 also accept access port configuration with voice vlan.
Thanks!
----- Original Message -----
From: "kym blair" <kymblair@hotmail.com>
To: <bobby1@ctimail3.com>; <ccielab@groupstudy.com>
Sent: Tuesday, February 25, 2003 5:37 AM
Subject: Re: Voice Vlan
> Bobby,
>
> You should trunk the port with DOT1Q. You'll need to configure a "voice
> vlan":
>
>
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12112cea/3550scg/s
wvoip.htm
>
> Also learn how to change the priority (COS) of inbound packets on both the
> voice vlan (from IP Phone) and the data vlan (from PC cascaded behind the
IP
> Phone).
>
> HTH, Kym
>
>
>
>
>
>
>
>
> >From: "Bobby" <bobby1@ctimail3.com>
> >Reply-To: "Bobby" <bobby1@ctimail3.com>
> >To: <ccielab@groupstudy.com>
> >Subject: Voice Vlan
> >Date: Tue, 25 Feb 2003 08:13:09 +0800
> >
> >Hi Friends,
> >
> >On Cat 3550 if a port (Configured for voice vlan) is carrying both voice
> >and
> >data
> >It should not be a access port. It should be a trunk. Agree ?
> >
> >Now which encapuslation to use. ISL of DOT1q really confused.
> >
> >Thanks
>
>
> _________________________________________________________________
> MSN 8 with e-mail virus protection service: 2 months FREE*
> http://join.msn.com/?page=features/virus
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:37 GMT-3