From: Sam.MicroGate@usa.telekom.de
Date: Wed Feb 26 2003 - 14:34:17 GMT-3
Good question. But I do not know the answer. Any one out there know the
answer?
Sam
-----Original Message-----
From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
Sent: Wednesday, February 26, 2003 11:01 AM
To: ccielab@groupstudy.com
Subject: Small Question.
Hello,
In the CCIE Lab, if per chance say you were as to do a rip_v1 / ospf
redistribution and you had a class full boundary,
Could you, instead of using are range/summary address under ospf, use the
ip rip send/ receive interface configuration command on rip routers, under
the interface configuration. Technically are you not still running rip v_1
as you have not typed version 2 under router rip, or are you...???
Or do you need to stick with ospf range/summary commands...etc.
Kind regards.
Paul.
****************************************************************************
************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
telephone ++ 353 1 6095000.
****************************************************************************
*************
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:37 GMT-3