From: Jung, Jin (jin.jung@lmco.com)
Date: Tue Feb 25 2003 - 18:50:48 GMT-3
I have the following,
AS 100
R1, R2, R3,
AS 200
R4, R5
R1-R4 is EBGP peer
R2 is setup as route-reflector for R1 and R3,
I have OSPF area 0 enable in all routes, and can reach all the interfaces.
No sync on all BGP routers
Question,
I have route 192.168.100.0/24 from R5,
All the BGP router has BGP route for 192.168.100.0
But R1 and R3 has next-hop address to R4 as best path,,
I guess this only happens in the lab, but since R1 and R3 has the path to
get back to R4 via OSPF, this work fine without putting next-hop-self
command in R1 to get back to R4,,
So If this was real lab, Do I still put "next-hop-self" on R1 even though I
have best path in the routing table?
Jin jung...
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:35 GMT-3