From: aansar@sscomp.com.sg
Date: Mon Feb 24 2003 - 23:59:10 GMT-3
as both Loop1 and loop2 are directly connected interface for R2 instead
R2 sees these routes as directly connected not learn from routing
process.. so it is not redistributed..
i think we should redistributed connected , filter with route-map to get
the necessary route..
i also faced this problem.. any input by experts will be helpful.
"Pedro Eira" <pdaeira@hotmail.com>
Sent by: nobody@groupstudy.com
24-02-03 11:34 PM
Please respond to "Pedro Eira"
To: ccielab@groupstudy.com
cc:
Subject: ISIS and OSPF redist
Hello,
I try to redistribute Lo 1 on R2 which is in ISIS(everything is L2) into
OSPF & Lo 0 on R2 which is in OSPF into ISIS, neither of those loopbacks
get redistributed into the other routing area.
OSPF ISIS
R1---------R2---------R3
I've tried to also redistribute connected, but have been unable to get it
working.
Any ideas?
------------------------------------------------------------------------
Add photos to your messages with MSN 8. Get 2 months FREE*.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:34 GMT-3