Re: Frame-Relay question

From: Cezar Fistik (cfistik@moldovacc.md)
Date: Mon Feb 24 2003 - 02:19:47 GMT-3

• Next message: Cezar Fistik: "ospf on demand with dialer profiles."
• Previous message: Roberts, Larry: "RE: Suggestion - FAQ of CCIE Lab"
• Maybe in reply to: Alsontra Daniels: "Frame-Relay question"
• Next in thread: Alsontra Daniels: "RE: Frame-Relay question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

Just to be sure, do you have on interface serial2 the

frame-relay route 121 interface Serial0 124

configured?

----- Original Message -----
From: "Alsontra Daniels" <aldaniels@email.uophx.edu>
To: <ccielab@groupstudy.com>
Sent: Sunday, February 23, 2003 11:33 PM
Subject: Re: Frame-Relay question
>
> ****The frame switch config is below:
> (note- I've changed dlci 120 to 124 in an effort eliminate random
mistakes.
> The change was made on both the switch and Hub router)
>
> interface Serial0
> description To R2
> no ip address
> no ip directed-broadcast
> encapsulation frame-relay
> clockrate 64000
> frame-relay lmi-type cisco
> frame-relay intf-type dce
> frame-relay route 110 interface Serial1 111
> frame-relay route 124 interface Serial2 121 <-----(all pvcs work except
this
> one)
> frame-relay route 130 interface Serial3 131

• Next message: Cezar Fistik: "ospf on demand with dialer profiles."
• Previous message: Roberts, Larry: "RE: Suggestion - FAQ of CCIE Lab"
• Maybe in reply to: Alsontra Daniels: "Frame-Relay question"
• Next in thread: Alsontra Daniels: "RE: Frame-Relay question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:33 GMT-3