Re: REFUSE-MESSAGE command

From: jfaure@sztele.com
Date: Thu Feb 20 2003 - 05:27:23 GMT-3

Gustavo:

Thanks for your help! I had an erroneous undestanding of how to use this
command: you must put it in the router that launchs the telnet, not in the
remote router. Then, if all 5 vty lines of the remote router are busy (and
only if you are telnetting to it using its hostname, not the ip address)
the message you configured appears.

Regards

Juan Faure Ferrer
email: jfaure@sztele.com

Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------

SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------

                                                                                       
                    "Gustavo Spadaro"
                    <gustavo_spadaro@ho Para: <jfaure@sztele.com>
                    tmail.com> cc:
                                              Asunto: Re: REFUSE-MESSAGE command
                    19/02/03 21:59
                                                                                       
                                                                                       

juan:

fiajte esta configuracion
Router 1:
ip host r5 133.3.5.5
busy-message r5 C no more line Vty C

Usa las 4 lines vty del router R5, y cuando quieras hacer un telnet desde
r1
a r5 , y al no tener r5 mas disponibles te saldra el mensaje que pusistes
"no more line Vty "

Un saludo

Gustavo

----- Original Message -----
From: <jfaure@sztele.com>
To: <erickbe@yahoo.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, February 19, 2003 7:54 PM
Subject: Re: REFUSE-MESSAGE command

> Erick:
>
> Do you know some solution to receive a preconfigured "refuse" message if
> all the vty lines are busy in the router wich you are telnetting?
>
> I'm also trying with the global "busy-message" command, but no luck: you
> receive a standard notification, not the message configured.
>
> Regards
> Juan Faure Ferrer
> email: jfaure@sztele.com
>
> Lmnea de Negocio de Telematica y CC
> Ingeniero de Integracisn de Redes y Sistemas
>
-------------------------------------------------------------------------- 

--
>
> SOLUZIONA TELECOMUNICACIONES
> Servicios Profesionales de UNION FENOSA
> Jerez, 3
> 28016 MADRID
> tel 91 579 30 00 fax 91 350 72 83
>
--------------------------------------------------------------------------
-
>
>
>
>
>                     "Erick B."
>                     <erickbe@yahoo       Para:   jfaure@sztele.com,
>                     .com>                 ccielab@groupstudy.com
>                                          cc:
>                     19/02/03 06:44       Asunto: Re: REFUSE-MESSAGE
command
>                     Por favor,
>                     responda a
>                     erickbe

>
>
>
>
>
>
> I think this is more for TTY lines (reverse telnet,
> etc). When all VTYs are in use the router doesn't have
> a open TCP port to connect to so it doesn't get to a
> connected TCP state.
>
> I do know the refuse-message w/tty does not work as
> documented since 12.0 code. I had this working on some
> term servers at work on old code until a code upgrade.
>
>
> With 12.0, 12.0T, 12.1, 12.1T, 12.2, 12.2T on various
> router and feature sets there is a bug with it that
> hasn't been fixed yet.
>
> With above versions, when you try to access a busy
> line it saids:
>
> Line has invalid autocommand "show
> refuse-message"Connection closed by foreign host
>
> *instead of* the refuse-message defined.
>
> The bug id is CSCdy51736 and is still in new status.
> The bug description is a little off and I've also
> asked it be corrected, and submitted feedback multiple
> times on it as this bug effects a production term
> server environment at work (minor annoyance).
>
> I've inquired about the bug w/TAC a few times but no
> one is assigned to work on it I'm told. Guess it's not
> that big of problem to get fixed. Now that you've
> reminded me I'll open another case on this to see if
> they can fix this.
>
> Erick
>
> --- jfaure@sztele.com wrote:
> > Hi,
> >
> > I'm trying this ios feature. I though if you enable
> > this in the vty line,
> > when the 5 vty connections are busy , you receive
> > the message you put
> > before this command. However, i've tried and at the
> > remote router only
> > appears the standard message informing you that the
> > connection was refused,
> > but no the message you have configured.
> >
> > Am i missing something ?
> >
> > Any help would be apreciated. Regards
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Shopping - Send Flowers for Valentine's Day
> http://shopping.yahoo.com

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:31 GMT-3