From: Brian Dennis (brian@labforge.com)
Date: Wed Feb 19 2003 - 20:47:12 GMT-3
What if all lines are full then the person on line 2 drops. What line is
the next person who telnets in going to hit ;-)
If you want to assign a separate vty for an admin user you should set it
up using a rotary.
Rack4R1#sho run | begin line vty
line vty 0 4
access-class 100 in
password XXXXXX
login
rotary 1
!
end
Rack4R1#sho run | include access-list 100
access-list 100 deny tcp any any eq telnet
access-list 100 permit tcp any any eq 7001
Rack4R1#
TCP port 3001 would also work.
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
brian@labforge.com
http://www.labforge.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Chuck Church
Sent: Wednesday, February 19, 2003 2:57 PM
To: jfaure@sztele.com; erickbe@yahoo.com
Cc: ccielab@groupstudy.com
Subject: Re: REFUSE-MESSAGE command
I suppose you could use your normal login info for the 0 through 3 VTY
lines, and then put an autocommand for VTY line 4, showing your message.
Or
you could assign a separate password for this line, so only you can get
into
that line, so that the main network guy is ever blocked from the device.
Chuck Church
CCIE #8776, MCNE, MCSE
----- Original Message -----
From: <jfaure@sztele.com>
To: <erickbe@yahoo.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, February 19, 2003 1:54 PM
Subject: Re: REFUSE-MESSAGE command
> Erick:
>
> Do you know some solution to receive a preconfigured "refuse" message
if
> all the vty lines are busy in the router wich you are telnetting?
>
> I'm also trying with the global "busy-message" command, but no luck:
you
> receive a standard notification, not the message configured.
>
> Regards
> Juan Faure Ferrer
> email: jfaure@sztele.com
>
> Lmnea de Negocio de Telematica y CC
> Ingeniero de Integracisn de Redes y Sistemas
>
------------------------------------------------------------------------
-- -- > > SOLUZIONA TELECOMUNICACIONES > Servicios Profesionales de UNION FENOSA > Jerez, 3 > 28016 MADRID > tel 91 579 30 00 fax 91 350 72 83 > ------------------------------------------------------------------------ -- - > > > > > "Erick B." > <erickbe@yahoo Para: jfaure@sztele.com, > .com> ccielab@groupstudy.com > cc: > 19/02/03 06:44 Asunto: Re: REFUSE-MESSAGE command > Por favor, > responda a > erickbe > > > > > > > I think this is more for TTY lines (reverse telnet, > etc). When all VTYs are in use the router doesn't have > a open TCP port to connect to so it doesn't get to a > connected TCP state. > > I do know the refuse-message w/tty does not work as > documented since 12.0 code. I had this working on some > term servers at work on old code until a code upgrade. > > > With 12.0, 12.0T, 12.1, 12.1T, 12.2, 12.2T on various > router and feature sets there is a bug with it that > hasn't been fixed yet. > > With above versions, when you try to access a busy > line it saids: > > Line has invalid autocommand "show > refuse-message"Connection closed by foreign host > > *instead of* the refuse-message defined. > > The bug id is CSCdy51736 and is still in new status. > The bug description is a little off and I've also > asked it be corrected, and submitted feedback multiple > times on it as this bug effects a production term > server environment at work (minor annoyance). > > I've inquired about the bug w/TAC a few times but no > one is assigned to work on it I'm told. Guess it's not > that big of problem to get fixed. Now that you've > reminded me I'll open another case on this to see if > they can fix this. > > Erick > > --- jfaure@sztele.com wrote: > > Hi, > > > > I'm trying this ios feature. I though if you enable > > this in the vty line, > > when the 5 vty connections are busy , you receive > > the message you put > > before this command. However, i've tried and at the > > remote router only > > appears the standard message informing you that the > > connection was refused, > > but no the message you have configured. > > > > Am i missing something ? > > > > Any help would be apreciated. Regards > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Shopping - Send Flowers for Valentine's Day > http://shopping.yahoo.com
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:32 GMT-3