From: Copleston Daniel (Daniel.Copleston@ukomfs.com)
Date: Thu Feb 20 2003 - 10:08:00 GMT-3
Depending on the IOS version you are using you will have a range of options
available after the | command (from simple string matching to full regexp
support). I find using the following helpful:
sh run | begin router ospf
This will also show all config after router ospf but it saves you scrolling
through the top parts of the config and you can always ctrl-c out of the
rest anyway.
Thanks,
Daniel
-----Original Message-----
From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
Sent: 20 February 2003 11:14
To: 'ccielab@groupstudy.com'
Subject: RE: Can you have OSPF without area 0 at all?
Hello,
It is possible to show part of a routers running configuration
Say you have a really long config, and you only want to look at the ospf
section under router ospf or you only want to look at the BGP section..etc.
on the router without having to scroll through the whole config,
Can this be done,
Kind regards.
Paul.
****************************************************************************
************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
telephone ++ 353 1 6095000.
****************************************************************************
*************
************************************************************************
The contents of this message and any attachments are confidential and
are intended solely for the attention and use of the addressee only.
Information contained in this message may be subject to legal,
professional or other privilege or may otherwise be protected by other
legal rules. This message should not be copied or forwarded to any other
person without the express permission of the sender. If you are not the
intended recipient you are not authorised to disclose, copy, distribute
or retain this message or any part of it.
If you have received this message in error, please notify the sender by
telephone (+44-20-7002-4000) and destroy the original message.
We reserve the right to monitor all e-mail messages passing through our
network.
************************************************************************
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:30 GMT-3