From: Ram Shummoogum (rshummoo@ca.ibm.com)
Date: Wed Feb 19 2003 - 18:29:44 GMT-3
What about dlsw icanreach netbios-name X
soon ccie <soonccie@yahoo.com>@groupstudy.com on 02/19/2003 01:17:20 AM
Please respond to soon ccie <soonccie@yahoo.com>
Sent by: nobody@groupstudy.com
To: ccielab@groupstudy.com
cc:
Subject: DLSW: allow incoming netbios host X
Hi all,
R1 ------DLSW--------R2.
DLSW peering between R1 (lo0 1.1.1.1) and R2 (lo0 2.2.2.2). R2 can's use
remote-peer command. The task is to let only machine with netbios name X
to
come in from R2.
What are the possible solutions? In R1, since it is incoming netbios , so
can't
leverage remote-peer command to apply the filtering because it does only
output
filtering based on the doc. The doc lists one command that may be applied
on
R2, but I want confirmation if this is correct or if there is other ways.
R2: dlsw netbios-name X remote-peer 1.1.1.1. (This cmd still use
remote-peer
though).
TIA.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:30 GMT-3