From: trust.hogo@sarcom.com
Date: Wed Feb 19 2003 - 19:04:56 GMT-3
Use NetBIOS input-access-filter command on the interface taking part in
DLSW.
-----Original Message-----
From: soon ccie [mailto:soonccie@yahoo.com]
Sent: Wednesday, February 19, 2003 1:17 AM
To: ccielab@groupstudy.com
Subject: DLSW: allow incoming netbios host X
Hi all,
R1 ------DLSW--------R2.
DLSW peering between R1 (lo0 1.1.1.1) and R2 (lo0 2.2.2.2). R2 can's use
remote-peer command. The task is to let only machine with netbios name X to
come in from R2.
What are the possible solutions? In R1, since it is incoming netbios , so
can't leverage remote-peer command to apply the filtering because it does
only output filtering based on the doc. The doc lists one command that may
be applied on R2, but I want confirmation if this is correct or if there is
other ways.
R2: dlsw netbios-name X remote-peer 1.1.1.1. (This cmd still use remote-peer
though).
TIA.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:30 GMT-3