From: OhioHondo (ohiohondo@columbus.rr.com)
Date: Thu Feb 20 2003 - 01:37:42 GMT-3
If you want to disallow a NetBIOS name coming into your router --- I agree
with the "netbios input-access-filter" as the way to accomplish this.
I believe that the "i can reach" statements are used for a router to tell
other routers what they can reach --- with the intent of alleviating the
need for the other routers to send explorers to find that 'reacability'
info. This mechanism will not work for what I understand you are trying to
accomplish.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Voss, David
Sent: Wednesday, February 19, 2003 9:32 PM
To: 'trust.hogo@sarcom.com'; soonccie@yahoo.com; ccielab@groupstudy.com
Subject: RE: DLSW: allow incoming netbios host X
I would have to say it's going to be icanreach/exclusive commands, netbios
access filters display the following when applying to ethernet interfaces.
r6(config-if)#netbios input-access-filter host TESTING
netbios interface commands only allowed on Token Ring like interfaces.
r6(config-if)#^Z
-----Original Message-----
From: trust.hogo@sarcom.com [mailto:trust.hogo@sarcom.com]
Sent: Wednesday, February 19, 2003 4:05 PM
To: soonccie@yahoo.com; ccielab@groupstudy.com
Subject: RE: DLSW: allow incoming netbios host X
Use NetBIOS input-access-filter command on the interface taking part in
DLSW.
-----Original Message-----
From: soon ccie [mailto:soonccie@yahoo.com]
Sent: Wednesday, February 19, 2003 1:17 AM
To: ccielab@groupstudy.com
Subject: DLSW: allow incoming netbios host X
Hi all,
R1 ------DLSW--------R2.
DLSW peering between R1 (lo0 1.1.1.1) and R2 (lo0 2.2.2.2). R2 can's use
remote-peer command. The task is to let only machine with netbios name X to
come in from R2.
What are the possible solutions? In R1, since it is incoming netbios , so
can't leverage remote-peer command to apply the filtering because it does
only output filtering based on the doc. The doc lists one command that may
be applied on R2, but I want confirmation if this is correct or if there is
other ways.
R2: dlsw netbios-name X remote-peer 1.1.1.1. (This cmd still use remote-peer
though).
TIA.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:30 GMT-3