From: Jerry (phase90@comcast.net)
Date: Sun Feb 23 2003 - 12:34:22 GMT-3
Try using Teraterm as terminal emulator on console port. By bogie I mean
broken router but maybe not. Do not use Windows Hyperterm - it is too
bug-ridden.
Jerry
----- Original Message -----
From: Malcolm Price <malcolm.price@lanbase.com>
To: ccie candidate <ccie1@lycos.com>
Cc: <ccielab@groupstudy.com>
Sent: Sunday, February 23, 2003 7:14 AM
Subject: RE: 2500 console problem
> I had the same issues with a 2900xl switch. I have heard of problems with
> HyperTerminal where it produces no terminal output for one router, but
> output for another. Try using a different terminal emulator i.e. terra
term.
>
>
> Have you tried different line speeds just incase the line speeds have
> dropped down?.
>
> Malcolm
> CCIE #10607
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> ccie candidate
> Sent: 23 February 2003 10:58
> To: ccielab@groupstudy.com
> Subject: 2500 console problem
>
>
> folks ;
> I have 2503 routers with the following problem :
>
> when I boot the router it DOES NOT SHOW UP ANYTHING TO THE CONSOLE PORT
> ..NOT A SINGLE MESSAGE .
>
> i have used the same console cable and hyper terminal with another routers
> ..it worked fine ..this means there is no issues with those the cable or
the
> hyper terminal .
>
> i am not sure if the console port is faulty or not .
>
>
> im sure on this list there are giants can advise which way i could follow
to
> make these routers usable .
>
>
> lets see some suggestions ....
>
> appreciate any help .
>
>
> _____________________________________________________________
> Get 25MB, POP3, Spam Filtering with LYCOS MAIL PLUS for $19.95/year.
> http://login.mail.lycos.com/brandPage.shtml?pageId=plus&ref=lmtplus
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:27 GMT-3