From: Malcolm Price (malcolm.price@lanbase.com)
Date: Sun Feb 23 2003 - 09:14:19 GMT-3
I had the same issues with a 2900xl switch. I have heard of problems with
HyperTerminal where it produces no terminal output for one router, but
output for another. Try using a different terminal emulator i.e. terra term.
Have you tried different line speeds just incase the line speeds have
dropped down?.
Malcolm
CCIE #10607
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
ccie candidate
Sent: 23 February 2003 10:58
To: ccielab@groupstudy.com
Subject: 2500 console problem
folks ;
I have 2503 routers with the following problem :
when I boot the router it DOES NOT SHOW UP ANYTHING TO THE CONSOLE PORT
..NOT A SINGLE MESSAGE .
i have used the same console cable and hyper terminal with another routers
..it worked fine ..this means there is no issues with those the cable or the
hyper terminal .
i am not sure if the console port is faulty or not .
im sure on this list there are giants can advise which way i could follow to
make these routers usable .
lets see some suggestions ....
appreciate any help .
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:29 GMT-3