From: Richard Davidson (rich@myhomemail.net)
Date: Sun Feb 16 2003 - 23:51:31 GMT-3
thanks all.
--- kym blair <kymblair@hotmail.com> wrote:
> Rich,
>
> If you're tagging in OSPF, "show ip ospf database".
>
> If you're tagging in EIGRP, "show ip eigrp
> topology".
>
> Tagging in RIPv2 is unreliable; don't recommend.
>
>
> An easy way to test is to create a loopback, then
> use a route-map to tag,
> then redistribute connected into the routing
> process.
>
>
> HTH, Kym
>
>
>
>
>
>
>
> >From: ray_gan74@hotmail.com
> >Reply-To: ray_gan74@hotmail.com
> >To: "Richard Davidson" <rich@myhomemail.net>,
> "groupstudy"
> ><ccielab@groupstudy.com>
> >Subject: Re: route tag info?
> >Date: Sun, 16 Feb 2003 16:38:40 -0800
> >
> >show ip route x.x.x.x (route)
> >
> >
> >
> >----- Original Message -----
> >From: "Richard Davidson" <rich@myhomemail.net>
> >To: "groupstudy" <ccielab@groupstudy.com>
> >Sent: Sunday, February 16, 2003 3:09 PM
> >Subject: route tag info?
> >
> >
> > > What is a good command to verify the tag info of
> a
> > > route? for example, if I redistribute and ad a
> tag to
> > > a route, what command would I use to verify the
> tag
> > > was set?
> > > Thanks
> > > Rich
>
>
>
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:25 GMT-3