From: kym blair (kymblair@hotmail.com)
Date: Sun Feb 16 2003 - 22:35:14 GMT-3
Rich,
If you're tagging in OSPF, "show ip ospf database".
If you're tagging in EIGRP, "show ip eigrp topology".
Tagging in RIPv2 is unreliable; don't recommend.
An easy way to test is to create a loopback, then use a route-map to tag,
then redistribute connected into the routing process.
HTH, Kym
>From: ray_gan74@hotmail.com
>Reply-To: ray_gan74@hotmail.com
>To: "Richard Davidson" <rich@myhomemail.net>, "groupstudy"
><ccielab@groupstudy.com>
>Subject: Re: route tag info?
>Date: Sun, 16 Feb 2003 16:38:40 -0800
>
>show ip route x.x.x.x (route)
>
>
>
>----- Original Message -----
>From: "Richard Davidson" <rich@myhomemail.net>
>To: "groupstudy" <ccielab@groupstudy.com>
>Sent: Sunday, February 16, 2003 3:09 PM
>Subject: route tag info?
>
>
> > What is a good command to verify the tag info of a
> > route? for example, if I redistribute and ad a tag to
> > a route, what command would I use to verify the tag
> > was set?
> > Thanks
> > Rich
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:25 GMT-3