RE: HSRP question

From: Amer Mdanat (amdanat) (amdanat@cisco.com)
Date: Sun Feb 16 2003 - 11:06:31 GMT-3

• Next message: Voss, David: "RE: DLSW"
• Previous message: Matthew Poole: "Re: DLSW redundacy methode-need confirmation"
• Maybe in reply to: CCIE FUN: "HSRP question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Depends on the router and the IOS you are using!
What you are trying to do if I understood correctly is MHSRP and this is
a supported feature on the larger platforms 7xxx and above and is
hardware related.

Hope this helps.
Amer

-----Original Message-----
From: CCIE FUN [mailto:ccieexam2002@yahoo.com]
Sent: Thursday, February 13, 2003 2:49 AM
To: ccielab@groupstudy.com
Subject: HSRP question

Hi all
I have two routers running HSRP for a network subnet
lets say for e.g 1.1.1.0/24 on E0 of both the routers.

now can i add secondary address to these routers on
Interface E0 and also run HSRP for these secondary
address.
I want to add about 10 secondary address.
how will the HSRP config be. Can i run HSRP for
multiple secondary addresses on these routers.

thanks

• Next message: Voss, David: "RE: DLSW"
• Previous message: Matthew Poole: "Re: DLSW redundacy methode-need confirmation"
• Maybe in reply to: CCIE FUN: "HSRP question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:24 GMT-3