From: Kumar, Senthil (senthil.kumar@intechnology.co.uk)
Date: Sat Feb 15 2003 - 17:46:14 GMT-3
why dont you make it simple by using nbar
class-map dlsw
match protocol dlsw
!
policy-map dlsw
class dlsw
bandwidth percentage 20
!
int s0/0
frame-relay traffic-shaping
frame-relay class dlsw..
-- just a model not the solution..i do it this way-----Original Message----- From: Cameron, John To: 'khalid_ameen@rayaintegration.com'; chenry@reuna.cl; sagevadi@yahoo.co.uk; ccielab@groupstudy.com Sent: 15/02/2003 19:24 Subject: RE: QoS: FRTS & CBWFQ
Wouldn't this be a simpliar way to do this?
interface Serial1.0 frame-relay traffic-shaping frame-relay class qos-ip-dlsw ! map-class frame-relay TEST frame-relay traffic-rate 9600 19600 no frame-relay adaptive-shaping frame-relay custom-queue-list 1 ! ! queue-list 1 protocol dlsw 0 queue-list 1 protocol ip 1 queue-list 1 queue 0 byte-count 3000 queue-list 1 queue 1 byte-count 3000
Thanks, JDC
-----Original Message----- From: khalid_ameen@rayaintegration.com [mailto:khalid_ameen@rayaintegration.com] Sent: Friday, February 14, 2003 10:30 AM To: chenry@reuna.cl; sagevadi@yahoo.co.uk; ccielab@groupstudy.com Subject: Re: QoS: FRTS & CBWFQ
your configuration will not get the required bandwidth in the byte-count plus the access-list is missing the tcp correct me if i am wrong!!
map-class frame-relay qos-ip-dlsw frame-relay traffic-rate 9600 19200 frame-relay custom-queue-list 1 no frame-relay adaptive-shaping
queue-list 1 protocol ip 1 list 100 queue-list 1 protocol ip 2 list 110 queue-list 1 queue 1 byte-count 2048 queue-list 1 queue 2 byte-count 1024
access-list 100 permit ip any any access-list 110 permit tcp any eq 2065 any access-list 110 permit tcp any any eq 2065 access-list 110 permit tcp any any eq 1981 access-list 110 permit tcp any any eq 1982 access-list 110 permit tcp any any eq 1983
interface Serial5/1/1 frame-relay traffic-shaping frame-relay class qos-ip-dlsw
Sage Vadi wrote: > > All, > > Q) On R1 configure the QoS default for the frame-relay > network to have a comitted information rate of 9600bps > and a burst size of 19200bps. Configure DLSW traffic > with 50% of the traffic followed by IP with 50%, apply > this to the map class in the step above. > > My Config: > > interface Serial5/1/1 > service-policy output DLSW&IP > frame-relay class qos > > class-map dlswTraff > match access-group 150 > class-map ipTraff > match access-group 1 > > policy-map DLSW&IP > class dlswTraff > bandwidth 50 > class ipTraff > bandwidth 50 > > map-class frame-relay qos > frame-relay bc 19200 > frame-relay mincir 9600 > no frame-relay adaptive-shaping > > access-list 1 permit any > access-list 150 permit tcp any eq 2065 any > > Q) Does this seem to be correct config? > > __________________________________________________ > Do You Yahoo!? > Everything you'll ever need on one web page > from News and Sport to Email and Music Charts > http://uk.my.yahoo.com
-- Cristian E. Henry REUNA
E-mail: chenry@reuna.cl Fono: 56-2-3370336
-------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:24 GMT-3