Sparse-mode Problem

From: Sunil Soporie (ssoporie@hotmail.com)
Date: Sat Feb 15 2003 - 14:18:34 GMT-3

Next message: Dang Quang Minh: "RE: Autoinstall with DNS server"
Previous message: Krucker, Louis: "Commercial Labs>>>>which one?"
Next in thread: Jonathan V Hays: "RE: Sparse-mode Problem"
Maybe reply: Jonathan V Hays: "RE: Sparse-mode Problem"
Maybe reply: kym blair: "RE: Sparse-mode Problem"
Maybe reply: kym blair: "Re: Sparse-mode Problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Folks,

I am having problems running Sparse-mode over Frame-Relay.
Here is how the network looks like.

R4....Ethernet...........R2 major
int.........Frame-Relay........................Pt-to-Pt. int...R6

I am configuring static RP at the R4 router.with the command (ip pim
rp-address 150.50.4.4) which is the loopback of R4 and have enabled
spare-dense mode on
R4 (loopback and Ethernet), R2(Ethernet and Serial interface)
and on R6(S0.2 for sparse-dense mode).

I can see the mapping at R2 (sh ip pim rp mapping) but not at R6.

Any help will be highly appreciated.

Any good URL for configuring Sparse-Dense mod ?.

Thanks,

Sunil

Next message: Dang Quang Minh: "RE: Autoinstall with DNS server"
Previous message: Krucker, Louis: "Commercial Labs>>>>which one?"
Next in thread: Jonathan V Hays: "RE: Sparse-mode Problem"
Maybe reply: Jonathan V Hays: "RE: Sparse-mode Problem"
Maybe reply: kym blair: "RE: Sparse-mode Problem"
Maybe reply: kym blair: "Re: Sparse-mode Problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:24 GMT-3