From: freewilly free (freewilly2002@rediffmail.com)
Date: Sat Feb 15 2003 - 09:50:57 GMT-3
Hi ,
I have 2 cisco MC3810 routers with t1/e1 controller, 2 serial
interfaces and 1 ethernet port.
Please let me know how i can test FR-ATM IWF using these
devices.
I need info particularly on physical connectivity.
On Sun, 09 Feb 2003 Wes Stevens wrote :
>I have remote site connecting over FRATM to two core
>routers. The FR side is a 2621 running 12.1(5)T code. The
>ATM side is a 7500 running 12.1(12a). Three times in the
>last week we have lost contact with the router. Each time
>the eigrp neighbors go down. I have caught this call 2 of
>the three times and have been able to log into the router by
>telneting to the serial interface for the atm. Eigrp is down
>and will not connect. Pings to the far interface work fine
>and telnet has a good response. The carrier claims that the
>line is fine and for a change I am in agreement at least at
>the physical level. The hardware was replaced yesterday. The
>next time it happens operations will call me directly and I
>will try and do some deeper debuging.
>
>My question is has anyone seen a carrier problem at the
>frame switch or a frame to atm problem that would let a
>telnet session through and not eigrp hello's?
>.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:24 GMT-3