From: Erick B. (erickbe@yahoo.com)
Date: Sat Feb 15 2003 - 04:05:24 GMT-3
The output of the image loading is fine (the first
short decompress is bootloader I believe).
12.1(8) mainline will not work with the NM-1A-T3 card.
Need one of following at minimum:
12.1(2)T, 12.1(5)YB, 12.1(5)YD, 12.2(1), 12.2(2)T,
12.2(2)XT
Ent plus 12.1(2)T needs 48meg DRAM ; IP Plus needs 40
meg and IP will run in 24 meg. You may be able to get
ent plus or IP plus to load in 32meg but maybe not...
if you do you may run into problems because your 2620
only has 32meg.
Erick
--- Jason Cash <cash2001@swbell.net> wrote:
> I remove those as well, to no avail. I am trying to
> load the Ent. Plus
> IOS to support the NM-1A-T3 card that I have. As
> you can see, it is
> reading the flash IOS as the ATM card is not
> recognized, then loads
> across the network...
>
> hostname 2620-2
> !
> boot system tftp c2600-js-mz.121-18.bin 137.20.20.10
> !
> memory-size iomem 10
> ip subnet-zero
> !
> ip audit notify log
> ip audit po max-events 100
> !
> interface FastEthernet0/0
> ip address 137.20.20.16 255.255.255.0
> speed 100
> full-duplex
> !
> ip default-gateway 137.20.20.10
> ip classless
> no ip http server
> !
> alias exec shi sh ip int brief
> !
> line con 0
> transport input none
> line aux 0
> line vty 0 4
> login
> !
> no scheduler allocate
> end
>
> 2620-2#reload
> Proceed with reload? [confirm]
>
> 00:57:09: %SYS-5-RELOAD: Reload requested
> System Bootstrap, Version 12.1(3r)T2, RELEASE
> SOFTWARE (fc1)
> Copyright (c) 2000 by cisco Systems, Inc.
> C2600 platform with 32768 Kbytes of main memory
>
> program load complete, entry point: 0x80008000,
> size: 0x4b0044
> Self decompressing the image :
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
> ############################################# [OK]
>
> %PA-2-UNDEFPA: Undefined Port Adaptor type 426 in
> bay 1
> Loading c2600-js-mz.121-18.bin from 137.20.20.10
> (via FastEthernet0/0):
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> [OK - 9396420/
> %SYS-6-BOOT_MESSAGES: Messages above this line are
> from the boot loader.
> 18792448 bytes]
> program load complete, entry point: 0x80008000,
> size: 0x8f5fa8
> Self decompressing the image :
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
>
########################################################################
> ####################### [OK]
>
> Configured I/O memory percentage was too large.
> Using 10 percent.
>
> Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and
> Computer
> Software clause at DFARS sec. 252.227-7013.
>
> cisco Systems, Inc.
> 170 West Tasman Drive
> San Jose, California 95134-1706
>
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-JS-M), Version
> 12.1(18), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2002 by cisco Systems, Inc.
> Compiled Mon 02-Dec-02 23:54 by kellythw
> Image text-base: 0x80008088, data-base: 0x80FFCDD8
>
> cisco 2620 (MPC860) processor (revision 0x600) with
> 29696K/3072K bytes
> of memory.
> Processor board ID JAD054606PC (3267703285)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian
> Technology Corp).
> TN3270 Emulation software.
> 1 FastEthernet/IEEE 802.3 interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash
> (Read/Write)
>
> ip audit notify log
> ^
> % Invalid input detected at '^' marker.
>
> ip audit po max-events 100
> ^
> % Invalid input detected at '^' marker.
>
> transport input none
> ^
> % Invalid input detected at '^' marker.
>
>
>
> Press RETURN to get started!
>
>
> 00:00:05: %PA-2-UNDEFPA: Undefined Port Adaptor type
> 426 in bay 1
> 00:00:07: %LINK-3-UPDOWN: Interface FastEthernet0/0,
> changed state to up
> 00:00:08: %SYS-5-CONFIG_I: Configured from memory by
> console
> 00:00:08: %LINEPROTO-5-UPDOWN: Line protocol on
> Interface
> FastEthernet0/0, changed state to down
> 00:00:10: %SYS-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-JS-M), Version
> 12.1(18), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2002 by cisco Systems, Inc.
> Compiled Mon 02-Dec-02 23:54 by kellythw
> 00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on
> Interface
> FastEthernet0/0, changed state to up
> 2620-2>
> -----Original Message-----
> From: Erick B. [mailto:erickbe@yahoo.com]
> Sent: Saturday, February 15, 2003 12:26 AM
> To: Jason Cash; ccielab@groupstudy.com
> Subject: Re: Boot over network runs after flash
>
> Get rid of the 'boot host', and 'boot network'
> commands. Just need the 'boot system' command.
>
> Make sure your TFTP server has it's root directory
> set
> to path where image is since no path is specified
> and
> right spelling/case. PumpKIN and the 3com server
> seem
> to the best TFTP Servers IMHO for windows. I prefer
> pumpkin as it's tiny and has never failed me. I've
> had
> clients have all sorts of trouble getting the Cisco
> one to work reliably as well as some others. If you
> use the 3Com server you can also boot via FTP which
> is
> more reliable since it's TCP and not UDP. Plus both
> pumpkin/3com server have a status window that shows
> the file transfer activity.
>
> HTH, Erick
>
> --- Jason Cash <cash2001@swbell.net> wrote:
> > I am trying to load an IOS image across the
> network,
> > but the router is
> > looking at the flash first. Tried a variety of
> > different things but
> > still not working.
> >
> > 2620-2#sh ver
> > Cisco Internetwork Operating System Software
> > IOS (tm) C2600 Software (C2600-IO3-M), Version
> > 12.1(2)T, RELEASE
> > SOFTWARE (fc1)
> > Copyright (c) 1986-2000 by cisco Systems, Inc.
> > Compiled Tue 16-May-00 16:23 by ccai
> > Image text-base: 0x80008088, data-base: 0x808D08C8
> >
> > ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE
> > SOFTWARE (fc1)
> >
> > 2620-2 uptime is 1 minute
> > System returned to ROM by reload
> > System image file is
> > "flash:c2600-io3-mz.121-2.T.bin"
> >
> > cisco 2620 (MPC860) processor (revision 0x600)
> with
> > 29696K/3072K bytes
> > of memory.
> > Processor board ID JAD054606PC (3267703285)
> > M860 processor: part number 0, mask 49
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > 1 FastEthernet/IEEE 802.3 interface(s)
> > 32K bytes of non-volatile configuration memory.
> > 8192K bytes of processor board System flash
> > (Read/Write)
> >
> > Configuration register is 0x2102
> >
> >
> > version 12.1
> > no service single-slot-reload-enable
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname 2620-2
> > !
> > boot host tftp c2600-js-mz.121-18.bin 137.20.20.10
> > boot network tftp tc2600-is-mz.121-18.bin
> > 137.20.20.10
> > boot system tftp c2600-js-mz.121-18.bin
> 137.20.20.10
> > !
> > !
> > !
> > !
> > !
> > memory-size iomem 10
> > ip subnet-zero
> > !
> > Interface FastEthernet0/0
> > ip address 137.20.20.16 255.255.255.0
> > speed 100
> > full-duplex
> > !
> > ip default-gateway 137.20.20.10
> > ip classless
> > no ip http server
> > !
> > !
> > alias exec shi sh ip int brief
> > !
> > line con 0
> > line aux 0
> > line vty 0 4
> > login
> > !
> > end
> >
> > 2620-2# wr m
> > Building configuration...
> > [OK]
> > 2620-2#reload
> > Proceed with reload? [confirm]
> >
> > 00:03:00: %SYS-5-RELOAD: Reload requested
> > System Bootstrap, Version 12.1(3r)T2, RELEASE
> > SOFTWARE (fc1)
> > Copyright (c) 2000 by cisco Systems, Inc.
> > C2600 platform with 32768 Kbytes of main memory
> >
> > program load complete, entry point: 0x80008000,
> > size: 0x4b0044
> > Self decompressing the image :
> >
>
########################################################################
> >
>
########################################################################
> >
>
########################################################################
> >
>
########################################################################
> >
>
########################################################################
> >
>
########################################################################
> >
>
########################################################################
> > ############################################# [OK]
> >
> > %PA-2-UNDEFPA: Undefined Port Adaptor type 426 in
> > bay 1
> > %SYS-6-READ_BOOTFILE_FAIL:
> > tftp://137.20.20.10/c2600-js-mz.121-18.bin
> > File read failed -- Timed out.
> >
> > %SYS-6-BOOT_MESSAGES: Messages above this line are
> > from the boot loader.
> > program load complete, entry point: 0x80008000,
> > size: 0x4b0044
> > Self decompressing the image :
> >
>
########################################################################
> >
>
########################################################################
> >
>
########################################################################
> >
>
########################################################################
> >
>
########################################################################
> >
>
########################################################################
> >
>
########################################################################
> > ############################################# [OK]
> >
> > Restricted Rights Legend
> >
> > Use, duplication, or disclosure by the Government
> is
> > subject to restrictions as set forth in
> subparagraph
> > (c) of the Commercial Computer Software -
> Restricted
> > Rights clause at FAR sec. 52.227-19 and
> subparagraph
> > (c) (1) (ii) of the Rights in Technical Data and
> > Computer
> > Software clause at DFARS sec. 252.227-7013.
> >
> > cisco Systems, Inc.
> > 170 West Tasman Drive
> > San Jose, California 95134-1706
> >
> >
> >
> > Cisco Internetwork Operating System Software
> > IOS (tm) C2600 Software (C2600-IO3-M), Version
> > 12.1(2)T, RELEASE
> > SOFTWARE (fc1)
> > Copyright (c) 1986-2000 by cisco Systems, Inc.
> > Compiled Tue 16-May-00 16:23 by ccai
> > Image text-base: 0x80008088, data-base: 0x808D08C8
> >
> > cisco 2620 (MPC860) processor (revision 0x600)
> with
> > 29696K/3072K bytes
> > of memory.
> > Processor board ID JAD054606PC (3267703285)
> > M860 processor: part number 0, mask 49
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > 1 FastEthernet/IEEE 802.3 interface(s)
> > 32K bytes of non-volatile configuration memory.
> > 8192K bytes of processor board System flash
> > (Read/Write)
> >
> > no service single-slot-reload-enable
> > ^
> > % Invalid input detected at '^' marker.
> >
> >
> >
> > Press RETURN to get started!
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Shopping - Send Flowers for Valentine's Day
> http://shopping.yahoo.com
>
>
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:24 GMT-3