From: Herve Bruyere (hbruyere@cisco.com)
Date: Tue Feb 11 2003 - 12:14:50 GMT-3
Kumar, Senthil wrote:
> was surpirsed
>
> when i did redistribute rip into ospf
> and
> when i did redistribute isis into ospf
For rip, this is not normal... you should see the connected RIP route
as a type 5 LSA in ospf database.
For isis, this is the expected behaviour. I was also surprised when I
discovered this, but you need to redistibute connected to advertise the
connected isis routes is ospf.
Herve
>
> connected routes (on which rip and isis was functioning) never gets
> announced to ospf/eigrp. need to do a redistribute static..
>
> this doesnt end there, you need a route map to choose the interface/networks
> to redistribute.
>
> also, when rip announces its route outside. its wise to use a distribute
> list and drop all the routes that it shouldnt own but owns because of
> classful nature.
>
> did you experience the same. but was referring to jeoff & solie..these info
> seem to be missing..what do you think is right,am i doing a mistake.
>
>
> ________________________________________________________________________
> This message has been checked for all known viruses by the
> CitC Virus Scanning Service powered by SkyLabs. For further information visit
> http://www.citc.it
>
> ___
> .
--
.. .. |
|| || | Herve Bruyere Phone : +32(0)2 704 5765
|| || | e-mail: hbruyere@cisco.com
|||| |||| | Customer Support
..:||||||:...:||||||:.. | Engineering
|
C i s c o S y s t e m s |
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:18 GMT-3