From: Bob Sinclair (bsin@cox.net)
Date: Mon Feb 10 2003 - 17:33:40 GMT-3
Jonathan,
Yes, I am saying that the VLAN you use to manage the 2924 is independent of
3550 management, though I am afraid I may be missing the real point you are
driving at here.
-Bob Sinclair
CCIE #10427, MCSE
Senior Network Engineer
Networking For Future, Inc.
www.nffinc.com
----- Original Message -----
From: "Jonathan R. Charles" <jrcdehc@ameritech.net>
To: "'Bob Sinclair'" <bsin@cox.net>; <ccielab@groupstudy.com>
Sent: Monday, February 10, 2003 3:30 PM
Subject: RE: Management VLAN on 3550
> So, let's say I have a 2924 trunked to a 3550, VLAN 40 is the management
> VLAN on the 2924... You are saying that it doesn't matter what VLAN I
> come in on to manage the 3550?
>
>
>
> Jonathan
>
> -----Original Message-----
> From: Bob Sinclair [mailto:bsin@cox.net]
> Sent: Monday, February 10, 2003 2:20 PM
> To: Jonathan R. Charles; ccielab@groupstudy.com
> Subject: Re: Management VLAN on 3550
>
> Jonathan,
>
> The 3550 with EMI software has no "management interface". It can be
> managed
> from any of its layer 3 interfaces, just like a router in this sense.
> The
> switch monitors all VLANs for which it has a layer 3 interface. You can
> telnet to the device on any of these layer 3 addresses, and SNMP, NTP
> and
> TACACS+ can be sourced from any of them.
>
>
> -Bob Sinclair
> CCIE #10427, MCSE
> Senior Network Engineer
> Networking For Future, Inc.
> www.nffinc.com
> ----- Original Message -----
> From: "Jonathan R. Charles" <jrcdehc@ameritech.net>
> To: <ccielab@groupstudy.com>
> Sent: Monday, February 10, 2003 2:46 PM
> Subject: Management VLAN on 3550
>
>
> > How do you change it from Vlan 1 to another vlan?
> >
> > Let's say you have 5 vlans. 10 20 30 40 50. and you want to make VLAN
> > 40 the management VLAN?
> >
> >
> > There is no 'management' command on the 3550 (like there is on the
> > 2924).
> >
> >
> >
> >
> >
> >
> > Jonathan
> > .
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:18 GMT-3