From: Wojciech.Gebka@ssk.com.pl
Date: Sat Feb 08 2003 - 16:47:19 GMT-3
If you have a Type 1 only ISIS area the default route outside is trough
Type 1/2 router. But because ISIS is a clns routing protocol to advertise
this defalult route you must turn on a clns routing in area. The " clns
routing" is turned automaticaly when you get the interface into isis
process.
Hi
Wojtek
Hunt Lee
<huntl@webcentr To: "'ccielab@groupstudy.com'"
al.com.au> <ccielab@groupstudy.com>
Sent by: cc:
nobody@groupstu Subject: ISIS help!!!
dy.com
03-02-08 12:28
Please respond
to Hunt Lee
Hi group,
Can someone please tell me what is the purpose for "clns routing" global
configuration command for ISIS?
I setup 5 routers in my home lab using ISIS, and I get IP connectivity
throughout
the entire network without using this command...
According to TCP/IP Vol 1 (Solie), it says this command should be
automatically
entered by IOS when ISIS is enabled, yet it is not in my router's configs
anywhere...
N.B:- I'm using IOS 12.2(12a)
Cheers,
Lee
.
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:16 GMT-3