From: Carlos (cchorao@xtra.co.nz)
Date: Sat Feb 08 2003 - 04:12:37 GMT-3
Thomas,
In my opinion the behaviour is as follows
linger = 0 --> backup stays active until it fails, even if the primary is
active;
linger = x--- > backup stays active for x minutes after the primary recovers
and then terminates all sessions.
ommission of the linger option ---> sessions remain active after primary
recovers , all new sessions occur over the primary.
Carlos
Telecom New Zealand - Advanced Solutions Group : Network Design and Security
----- Original Message -----
From: "Thomas Stuart" <tastuart@comcast.net>
To: <ccielab@groupstudy.com>
Sent: Saturday, February 08, 2003 7:00 PM
Subject: dlsw please cast your vote
> all,
>
> i have docs from cisco, and other ccie study sites related to dlsw and the
linger option.
>
> i do NOT know which is accurate:
>
> 1. linger 0 = all existing sessions on the backup router IMMEDIATELY drop
when primary recovers.
>
> or
>
> 2. do NOT specify ANY linger option = all existing sessions on the backup
router IMMEDIATELY drop when primary recovers.
>
> thanks,
>
> tom
> .
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:16 GMT-3