From: Fadil (fadiltakipte@hotmail.com)
Date: Sat Feb 08 2003 - 01:17:52 GMT-3
I think it is quiet normal for him to post it here. So the future customers
get a chance to know what they are going to face.
We pay alot of money but get alot of mistakes.
They say that they have updated the labs according to the new version but
when I got the new version I saw a question that was asking me to give ip
address to sc0 interface of 3550.
Fadil
----- Original Message -----
From: "Howard C. Berkowitz" <hcb@gettcomm.com>
To: <ccielab@groupstudy.com>
Sent: Friday, February 07, 2003 6:28 PM
Subject: Re: a lot of mistake on IPexpert scenario
> This seems like an IPexpert customer support issue. Why are you
> posting it here? It's one thing to discuss commercial lab issues
> with other students (and the posts should be marked COM), but another
> thing to request specific fixes here.
>
> Howard Berkowitz
> Member of Moderation Team
>
>
> At 3:42 PM -0800 2/7/03, Mustafa M Bayramov wrote:
> >The scenario itself very interested but I found a lot of
> >mistakes/mistypes etc
> >
> >Lab 307
> >A configure R3 - R4 using DLCI (but it should be R2 - R3) I work
> >with this lab an hour and after that I realize that it mistyped.
> >(price for each e-scenario 50$ and I'm not so reach to buy mistyped
> >scenario )
> >
> >Lab 308
> >
> >In section A you required configure EIGRP 308 on backbone frame-relay
> >
> >But then in section B you asked to configure AS 305 on all routers
> >expect ATM/ISDN interface .
> >Well I made this but after that I look at IPexpert itself solution I did
> >find any EIGRP AS 305.
> >
> >Dear IPexpert could you post all fix to all you lab scenarios?
> >
> >
> >
> >Mustafa M Bayramov
> >
> >CISSP
> >CCNP,CCDP,Cisco Security Specialist
> >Network engineer and security analyst
> .
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:16 GMT-3