From: Aaron Woody (awoody@columbus.rr.com)
Date: Sat Feb 08 2003 - 00:23:29 GMT-3
If you do a passive-interface in eigrp you will stop any adjacencies from
forming, therefore no eigrp routes on that interface.
Aaron
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
sam
Sent: Friday, February 07, 2003 11:25 AM
To: 'Brown, Patrick (NSOC-OCF}'
Cc: ccielab@groupstudy.com
Subject: RE: Redistribution & Summarization Behaviour in EIGRP & OSPF
Forgive me, I am confused but will this be in any way affected if you do
a
'passive interface e1' within EIGRP on router B?
Sam Sena
4500 New Brunswick Ave
Piscataway NJ
(732) 424-8008 (o)
(732) 424-7388 (f)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brown, Patrick (NSOC-OCF}
Sent: Friday, February 07, 2003 8:11 AM
To: rionaldi@cbn.net.id; ccielab@groupstudy.com
Subject: RE: Redistribution & Summarization Behaviour in EIGRP & OSPF
Put the ip summary-address eigrp 1 192.168.1.0 255.255.255.0 on
interface e1 of router B. Do redistribution, and
this should work for EIGRP.
Tx,
Patrick
-----Original Message-----
From: rionaldi@cbn.net.id [mailto:rionaldi@cbn.net.id]
Sent: Friday, February 07, 2003 5:04 AM
To: ccielab@groupstudy.com
Subject: Redistribution & Summarization Behaviour in EIGRP & OSPF
Dear All,
3 routers
Router A (e0) ----------------- (e0) Router B (e1) --------------------
Router C
Router A running EIGRP
Router B running EIGRP and OSPF
Router C running OSPF
There are many routes for EIGRP domain with the same major network: let
say
192.168.1.0
Mutual redistribution happens in Router B, I am being asked to do
summarization in router B so router C only see one route 192.168.1.0/24
in
their OSPF route.
I fail to do this with this way:
I tried to summerize th EIGRP in Router B e0 using Ip
summary-address.... and
I do redistribution in router B.
The only way that works it to do summarization in router B under OSPF..
so I
put
router ospf 100
summary-address 192.168.1.0 255.255.255.0
My question:
1. Why this behaviour happen?
2. Does summarization process only happen for the routes that leaving
the
router/outgoing routes? Can it be implemented for incoming routes
.
.
.
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:16 GMT-3