From: Michael Snyder (msnyder@revolutioncomputer.com)
Date: Wed Feb 05 2003 - 23:44:25 GMT-3
I did this about two years ago. My solution was to change the isdn
switch type on the atlas. My second choice of switch time worked well.
(I don't remember what it was, only that it fixed the problem)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Richard Davidson
Sent: Wednesday, February 05, 2003 4:49 PM
To: groupstudy
Subject: Atlas 550 spid setup
I am having a killer time with the atlas 550 spid
setup. When I follow the documentation that adtran
uses they say to configure the spid list with 1 call
for each spid. This can be seen in interface
configuration mode on the bri interface of the atlas.
If i set this to 1 like the directions say, my router
can't call out on more than 1 b channel. If I set
this to 2, my router can call out on both b channels.
Does any one know which it shoul be? I used the
directions from the following link:
http://www.adtran.com/adtranpx/Doc/0/FD1EU94LQ3R4H9L2DN1CCS3T56/CU-78878
8ef4dfa4bf1a6824e40993aa5e8.html
.
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:11 GMT-3