From: Mike Schlenger (mschlenger@meridianitsolutions.com)
Date: Tue Feb 04 2003 - 19:45:10 GMT-3
ip rtp header-compression
Investigate this command and see what it does for your application. It
should take the IP/RTP/UDP header down from 40 bytes to 2-4 bytes.
-Mike
Michael Schlenger
CCIE #7079
Meridian IT/N2N Solutions
mschlenger@meridianitsolutions.com
847.592.3912
-----Original Message-----
From: Lillemor Hamnqvist [mailto:lillemor@hamnqvist.org]
Sent: Tuesday, February 04, 2003 2:04 PM
To: ccielab@groupstudy.com
Subject: OT: Voice compression
Hi,
I have a dedicated VoIP circuit, HDLC. What can I do to get the better
compression? I'm using g729, but it looks like each call takes about 30kb.(I
look at the load in the serial line). I would expect it to be lower. Is the
load number in 'show interface serial' accurate ? What is your experience ?
Thank you, /lillemor .
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:09 GMT-3