From: Colin Barber (Colin.Barber@telewest.co.uk)
Date: Mon Feb 03 2003 - 07:27:08 GMT-3
This is a question from an old lab relating to a Cat 5xxx. You cannot
overload the backplane of a 3550 as it's non-blocking.
-----Original Message-----
From: Hunt Lee [mailto:ciscoforme3@yahoo.com.au]
Sent: 02 February 2003 01:37
To: ccielab@groupstudy.com
Subject: 3550
Hello Group,
I have a lab requirement which says:-
Configure the 3550 so that if the backplane of the switch gets overloaded,
the ports
in VLAN 3 get serviced before the ports in VLAN 5.
Anyone knows how to achieve this?
Regards,
H.
http://movies.yahoo.com.au - Yahoo! Movies
- What's on at your local cinema?
.
------------------------------------------------------------------------------
Live Life in Broadband
www.telewest.co.uk
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.
Statements and opinions expressed in this e-mail may not represent those of the company. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.
==============================================================================
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:01 GMT-3