RE: 3550

From: Hunt Lee (huntl@webcentral.com.au)
Date: Mon Feb 03 2003 - 02:06:12 GMT-3

• Next message: love cisco: "Cisco voice"
• Previous message: Greg Sporton: "RE: ISDN assumptions."
• Maybe in reply to: Hunt Lee: "3550"
• Next in thread: Colin Barber: "RE: 3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Erick,

Can you please teach me how I can do the per-vlan QoS map??

Thanks in advance,

Best Regards,
Hunt

-----Original Message-----
From: Erick B. [mailto:erickbe@yahoo.com]
Sent: Monday, 3 February 2003 2:23 PM
To: Hunt Lee; ccielab@groupstudy.com
Subject: Re: 3550

Hunt,

I think this is done with QoS queuing / wrr
configuration with possible use of the expedite queue.
Couldn't find anything in document with this sample
exactly but QoS seems like the only area where this
could be achieved. Would have to do a per-vlan qos map
to map certain values to each vlan so the traffic can
be weighed.

I'm not familiar with the lab scenario you're doing so
might be barking up the wrong tree.

--- Hunt Lee <ciscoforme3@yahoo.com.au> wrote:
> Hello Group,
>
> I have a lab requirement which says:-
>
> Configure the 3550 so that if the backplane of the
> switch gets overloaded, the ports
> in VLAN 3 get serviced before the ports in VLAN 5.
>
> Anyone knows how to achieve this?
>
> Regards,
> H.

• Next message: love cisco: "Cisco voice"
• Previous message: Greg Sporton: "RE: ISDN assumptions."
• Maybe in reply to: Hunt Lee: "3550"
• Next in thread: Colin Barber: "RE: 3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:01 GMT-3