From: David Terry (ETL) (David.Terry@etl.ericsson.se)
Date: Fri Jan 17 2003 - 09:45:20 GMT-3
Hello Bobby,
What ios are you running?
This is what you should expect to see.. I have configured int eth 0/0 with
Int eth 0/0
ip irdp
ip irdp pref 1000
When I do a sh ip irdp I get this :-
dr13#sh ip irdp
Ethernet0/0 has router discovery enabled
Advertisements will occur between every 450 and 600 seconds.
Advertisements are sent with broadcasts.
Advertisements are valid for 1800 seconds.
Default preference will be 1000.
Serial0/0 has router discovery disabled
Ethernet0/1 has router discovery disabled
Serial1/0 has router discovery disabled
Serial1/1 has router discovery disabled
Serial1/2 has router discovery disabled
Serial1/3 has router discovery disabled
Loopback0 has router discovery disabled
dr13#
HTH
David
-----Original Message-----
From: Bobby [mailto:bobby1@ctimail3.com]
Sent: 17 January 2003 11:50
To: ccielab@groupstudy.com
Subject: IRDP
HI,
I am trying to enable irdp on the ethernet interface of the router with ip
irdp command.
Even after entering the command if i verify the same with show ip irdp
command
it say's that irdp is not enabled. Any suggestions ?
Thanks
.
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:52 GMT-3