From: Emre (emrekoyuncu@hotmail.com)
Date: Thu Jan 16 2003 - 02:36:58 GMT-3
Jason,
I checked my old notes and configurations and saw that although I had
configured subinterface multipoint 0.1 with selector byte set to 00 they
were working properly. Is that something related to the IOS version ? Do you
have a link about that ?
Thanks in advance
Emre Koyuncu CCIE #10916
----- Original Message -----
From: "Jason Sinclair" <sinclairj@powertel.com.au>
To: <ccielab@groupstudy.com>
Sent: Wednesday, January 15, 2003 5:27 PM
Subject: FW: Please help!!!
> All,
>
> I forwarded this email to the group as it is an often overlooked config
> issue with Cisco ATM. You need to ensure that the selector byte for ATM is
> set to the same as the sub-if it is configured under for this to work
> correctly. If anyone has any queries on this please post to the group and
> I'll try to explain.
>
> Kind Regards,
>
> Jason Sinclair CCIE #9100
> Manager, Network Control Centre
> POWERTEL
> 55 Clarence Street,
> SYDNEY NSW 2000
> AUSTRALIA
> office: + 61 2 8264 3820
> mobile: + 61 416 105 858
> email: sinclairj@powertel.com.au
>
> -----Original Message-----
> From: Hunt Lee [mailto:huntl@webcentral.com.au]
> Sent: Thursday, 16 January 2003 12:13
> To: 'Jason Sinclair'
> Subject: RE: Please help!!!
>
> Jason,
>
> It's working now ;-) Thanks!!
> Regards,
> Hunt
>
>
> -----Original Message-----
> From: Jason Sinclair [mailto:sinclairj@powertel.com.au]
> Sent: Wednesday, 15 January 2003 8:42 AM
> To: Hunt Lee; 'ccielab@groupstudy.com'
> Subject: RE: Please help!!!
>
>
> Hunt,
> Try using the selector byte of 01 under the subinterface - you currently
> have it set to 00. A Cisco quirk is that this needs to be the same as the
> subinterface as it is applied to. If this doesn't work, please let me
know.
> Regards,
> Jason Sinclair CCIE #9100
> Manager, Network Control Centre
> POWERTEL
> 55 Clarence Street,
> SYDNEY NSW 2000
> AUSTRALIA
> office: + 61 2 8264 3820
> mobile: + 61 416 105 858
> email: sinclairj@powertel.com.au
>
> -----Original Message-----
> From: Hunt Lee [mailto:huntl@webcentral.com.au]
> Sent: Tuesday, 14 January 2003 18:21
> To: 'ccielab@groupstudy.com'
> Subject: Please help!!!
>
> Hi All,
> I have tried and change my following ATM configurations many times, but I
> couldn't find anything wrong. Yet I just couldn't ping the ATM interface
> between the routers.
> I have tried changing the encapsulation to aal5snap, but with no luck.
> Any ideas would be greatly appreciated.
> Best Regards,
> Hunt Lee
>
>
> interface ATM0/0/0
> no ip address
> no atm ilmi-keepalive
> pvc 0/5 qsaal
> !
> pvc 0/16 ilmi
> !
> !
> interface ATM0/0/0.1 multipoint
> ip address 35.0.0.1 255.255.255.0
> atm nsap-address 47.00000000000000000000000A.111111111111.00
> !
> svc SVCA nsap 47.00000000000000000000000A.222222222222.00
> protocol ip 35.0.0.2 broadcast
> encapsulation aal5mux ip
>
>
> ======================
>
> interface ATM0/0/0
> no ip address
> no atm ilmi-keepalive
> pvc 0/5 qsaal
> !
> pvc 0/16 ilmi
> !
> !
> interface ATM0/0/0.1 multipoint
> ip address 35.0.0.2 255.255.255.0
> atm nsap-address 47.00000000000000000000000A.222222222222.00
> !
> svc SVCB nsap 47.00000000000000000000000A.111111111111.00
> protocol ip 35.0.0.1 broadcast
> encapsulation aal5mux ip
>
> --
> WebCentral Pty Ltd Australia's #1 Internet Web Hosting Company
> Level 1, 96 Lytton Road. Network Operations - Systems Engineer
> PO Box 4169, East Brisbane. email: huntl@webcentral.com.au
> Queensland, Australia. phone: +61 7 3249 2553
> .
> **********************************************************************
> PowerTel Limited, winners of
> Best Corporate/Wholesale Broadband Initiative, Australian Telecom Awards
> 2002
> Broadband Wholesale Carrier of the year, CommsWorld Telecomms Awards 2001
> Best Emerging Telco, Australian Telecom Awards 2001
>
> **********************************************************************
> This email (including all attachments) is intended solely for the named
> addressee. It is confidential and may contain commercially sensitive
> information. If you receive it in error, please let us know by reply
email,
> delete it from your system and destroy any copies.
> This email is also subject to copyright. No part of it should be
reproduced,
> adapted or transmitted without the prior written consent of the copyright
> owner.
> Emails may be interfered with, may contain computer viruses or other
defects
> and may not be successfully replicated on other systems. We give no
> warranties in relation to these matters. If you have any doubts about the
> authenticity of an email purportedly sent by us, please contact us
> immediately.
>
> **********************************************************************
>
>
> **********************************************************************
> PowerTel Limited, winners of
> Best Corporate/Wholesale Broadband Initiative, Australian Telecom Awards
2002
> Broadband Wholesale Carrier of the year, CommsWorld Telecomms Awards 2001
> Best Emerging Telco, Australian Telecom Awards 2001
>
> **********************************************************************
> This email (including all attachments) is intended solely for the named
> addressee. It is confidential and may contain commercially sensitive
> information. If you receive it in error, please let us know by reply
email,
> delete it from your system and destroy any copies.
>
> This email is also subject to copyright. No part of it should be
reproduced,
> adapted or transmitted without the prior written consent of the copyright
owner.
>
> Emails may be interfered with, may contain computer viruses or other
defects
> and may not be successfully replicated on other systems. We give no
> warranties in relation to these matters. If you have any doubts about
> the authenticity of an email purportedly sent by us, please contact us
> immediately.
>
> **********************************************************************
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:50 GMT-3